Toshiba e-studio550 Service Manual page 187

[D] Developer unit
(1) Remove the toner cartridge drive unit and
toner recycle unit.
(2) Turn the L-shaped shaft upward to release the
lock.
(3) Disconnect 1 connector and pull out the
developer unit to the front side.
[E] Developer material
(1) Remove the developer unit.
(2) Remove 2 screws and take off the top cover.
(3) Tilt the developer unit and get out the
developer material with turning the rear side
gear.
(4) Put in a new material.
(5) Turn the rear side gear several times to
uniform the material.
e-STUDIO550/650/810 DEVELOPER UNIT
Developer unit
Top cover
12 - 14
L-shaped
shaft
Gear
Gear
JUNE 2002 © TOSHIBA TEC