6.3 Disassembly and Replacement
[A] Main motor
(1) Remove the upper rear cover, the lower rear
cover, the upper feed cover and the lower feed
cover.
(2) Remove the rear inner cover (SU)(2 screws)
and the rear inner cover (U) (3 screws).
(3) Remove the main motor (2 connectors and 2
screws).
[B] Clamshell fulcrum drive unit
(1) Remove the wire harness from the M band of
the clamshell fulcrum bracket.
(2) Remove the clamshell fulcrum drive unit (1
connector and 3 screws).
4560/4570 DRIVE
Rear Inner Cover (SU)
M Band
Clamshell fulcrum drive unit
6 - 2
Rear Inner Cover (U)
Connector
Main motor
Connector
Nov. 1997 © TOSHIBA