Toshiba e-studio550 Service Manual page 172

[H] Drum motor
(1) Remove the rear cover and take off the SYS
board and hard disk with the bracket.
(2) Remove 3 screws and take off the drum
wheel.
(3) Disconnect 1 connector and remove 3 screws
to take off the drum motor with the bracket.
(4) Remove 3 screws and take off the motor.
Note: When installing the drum motor, fix it keeping
the bracket in the direction of the white arrow.
e-STUDIO550/650/810 DRUM/CLEANER UNIT
Drum wheel
Drum motor
11 - 10
Connector
JUNE 2002 © TOSHIBA TEC