Toshiba e-studio550 Service Manual page 239

16. 2. Construction
Jam access cover
Feeding/transporting section
Feeding/transporting
section
Original feeding tray
Drive/control section
e-STUDIO550/650/810 RADF
Apparatus
• Jam access cover
• Pickup belt
• Feed roller
• Separation roller
• Registration roller
• Read roller
• Exit/Reverse roller
• Intermediate transport roller
• Small original reverse roller
• Small original exit roller
• Original feeding tray
Drive/control section
Large original recieving section
• Empty sensor
• Upper limit sensor
• Lower limit sensor
• Cover open/close sensor
• Original length sensor
• Registration sensor
• Original width sensor
• Read sensor
• Intermediate transport sensor
• Large original exit sensor
• Small original reverse sensor
• Small original exit sensor
• Tray sensor
• Tray width sensor
• Feed motor
• Tray lift motor
• Read motor
• Large original exit motor
• Disengagement solenoid
• Large original exit solenoid
• Small original exit solenoid
• RADF open/close sensor
• APS operation sensor
• Cover open/close switch
• RADF open/close switch
16 - 2
Original feeding tray
Small original recieving section
Electric parts
JUNE 2002 © TOSHIBA TEC