Toshiba e-studio550 Service Manual page 226

(3) Remove 2 screws, release 2 harness clamp and
take off the bracket with releasing the catching
section.
(4) Remove 2 screws and disconnect 1 connector.
(5) Remove 1 C-ring (rear).
(6) Remove 1 E-ring and take off the gear.
(7) Remove 2 screws and take off the bearing (rear).
(8) Remove 1 C-ring (front).
e-STUDIO550/650/810 FUSER UNIT
Harness clamp
Connector
Bearing (rear)
14 - 20
C-ring (rear)
Gear
C-ring (front)
JUNE 2002 © TOSHIBA TEC