Toshiba e-studio550 Service Manual page 40

2. 6. Disassembly and Replacement of
Covers and PC boards
2. 6. 1. Covers
[A] Front cover/Front side right inner cover
(1) Open the front cover.
(2) Pull out 2 L-shaped pins and take off the front
cover.
(3) Remove 2 screws and take off the front side
right inner cover.
[B] Feed side rear cover/Feed side top cover/
Feed side center cover
(1) Remove 1 screw and take off the feed side
rear cover.
(2) Remove 2 screws and take off the feed side
top cover.
(3) Open the bypass unit tray and remove 2
screws. Then remove 6 screws and take off
the feed side center cover.
[C] Exit side top cover/Exit side rear cover/
Exit side bottom cover
(1) Remove 2 screws and take off the exit side
top cover.
(2) Remove 1 screw and take off the exit side
rear cover.
(3) Remove 6 screws and take off the exit side
bottom cover.
JUNE 2002 © TOSHIBA TEC
L-shaped
pin
Front side right inner cover
Feed side
top cover
Feed side
center cover
Exit side
rear cover
2 - 27 e-STUDIO550/650/810 OUTLINE OF THE MACHINE
Front cover
Feed side
rear cover
Exit side
top cover
Exit side
bottom cover