4.4.1.2 Creating a Route
Repeat the "Adding Waypoint" procedure described in the previous Section 4.4.1.1
"Adding Waypoint". The sequence of moving the cursor and pressing 'ROUTE' is
continued to create the Route, until you have reached the last Waypoint, your final
destination. Segments connecting the Waypoints are shown and the starting point is
identified by a circle surrounding the first Waypoint of the Route:
To create another route, press 'MENU' + 'Route' + 'Select' + 'ENTER' then select
open position and press 'ENTER'.
4.4.1.3 Deleting Waypoint
Place cursor on Waypoint
Press 'ENTER'. Select "DELETE" and press 'ENTER': select "YES" and press
'ENTER' (select "NO" and press 'ENTER' to abort operation). The Waypoint is deleted
and a new line between previous and next Waypoint is shown:
GPS Chart 150
Figure 4.4.1.2 - Route planning
NOTE
Figure 4.4.1.3 - Deleting Waypoint (I)
Page 39