Creating A "Route" And Storing It Into Memory - Standard Horizon MAGNUM NAV-40 Owner's Manual

The MAGNUM has the capability to make a route from prevously stored marks
and waypoints.
1. With the MAGNUM turned on press the [ MENU ] key, highlight "RECALL
MEMORY" and click on this selection.
2. Highlight "CREATE" and click on this selection.
3. A "CREATE" pop-up window will be shown. To begin, choose and enter in a
name for the route.
4. After completing step 3, move the Joystick knob down to highlight "LIST"
and click on this selection.
5. A "ROUTE LIST" pop-up window will be shown, select "ADD" and click to
enter.
6. Highlight the first mark or waypoint to be the first point in the route leg and
click to enter.
7. Repeat steps 4-6 to enter in other legs of the route.
8. If you made a mistake in the order of selected marks or waypoints in the
route, you can change the order by simply highlighting the mark or waypoint
you desire to move, then push the Joystick to the right to hightlight "UP" or
"DOWN." Click to move the item.
9. When finished move the Joystick to the right to highlight "OK" and click to
save the route into memory.
Basic Operation
C "R "
REATING A OUTE AND
S M
TORING IT INTO EMORY
35