At this point the Route is saved as ROUTE01. If you would like to save the Route under a specific name
follow the next steps.
2.7.2
CHANGING THE NAME OF A ROUTE
1. To name the Route move the
a Waypoint or on a leg). For example if you touch a Waypoint this screen appears (see A):
2. Tap on the
3. Tap on
name; when finished tap on
4. Press the
2.7.3
CREATING AN OLYMPIC ROUTE OR BOUNDARY
This feature allows the starting point in a Route to be saved as the final destination point.
1. On the Chart page move the
the starting Waypoint in the Route.
2. Press the
3. Move the
ShuttlePoint knob or touch the screen to the second Lat/Lon of the next leg
in the Route.
4. Press the
starting Waypoint to the second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route (see A).
6. Then move the
7. Tap on the
(see B and C).
2.7.4
MAKING ADDITIONAL ROUTES
To create another Route the CPN Series Chart Plotter must be told that you want to create
a second Route.
Page 66
ShuttlePoint knob or touch the screen on the Route (on
Soft Key. The Edit Route page appears(see B).
. The touchscreen keyboard appears. Insert the desired Route
, the keyboard disappears.
key to show the Chart page.
ShuttlePoint knob or touch the screen to the Lat/Lon of
key, the starting Waypoint will be placed under the cursor.
key. Another Waypoint is shown under the cursor and a line joins the
ShuttlePoint knob or touch the screen to the last Waypoint.
Soft Key. A line joins the starting Waypoint and the last Waypoint
Owner's Manual