2.7 ROUTES
A Route can consist of Waypoints or Marks. The difference is when a Route is made using
Waypoints and the Route is deleted the Waypoints are also deleted. However if a Route is
made of Marks and the Route is deleted the Marks stay in memory. See the example below
that shows how the CPN Series Chart Plotter switches from one Waypoint to another.
2.7.1
CREATING A ROUTE USING WAYPOINTS
1. On the Chart page move the
the starting Waypoint in the Route.
2. Press the
3. Move the
ShuttlePoint knob or touch the screen to the second Lat/Lon of the next leg
in the Route.
4. Press the
a line joins the starting Waypoint to the second Waypoint.
5. Repeat steps 3 and 4 until all Waypoints are entered into the Route.
CPN700i and CPN1010i Multimedia Chart Plotters
ShuttlePoint knob or touch the screen to the Lat/Lon of
key, you will notice the starting Waypoint
key. You will notice another Waypoint is shown under the cursor and
will be placed under the cursor.
Page 65