Connectors - Nikon Eclipse Ni-E Instruction Manual

Connectors

1.4
CONTACT ARM2
(Connect to CONTACT ARM2 of
Ni-E main body)
CONTACT ARM2
(Connect to CONTACT ARM2 of
contact arm)
DSC2
(Connect to EXT.I/O of
DS-L3/U3)
ERGO/JOY
(Connect to ergo controller
or
joystick controller)
ND
(Connect to the motorized
ND filter wheel)
BOX
(Connect to Ni-E of control box A)
HGFIE
(Connect to motorized HG
precentered fiber
illuminator)
Chapter 1
Components
CONTACT ARM2
USB
DSC1
CAUTION!
1. Do not touch the lamphouse while the lamp is lit.
HGFIE
The surface of the lamphouse becomes hot when the
lamp is on.
2. Turn off the power and allow the lamp and lamohouse
to cool enough before replacing the lamp.
Wait for at least 30 minutes after turning off the
lamp.
BOX
3. Use 12V100W HALOGEN lamp only.
JAPAN
Ni-E main body (Rear)
Power switch Power LED
Input voltage display label
Control Box A (Front/Rear)
5
CONTACT ARM1
(Connect to CONTACT ARM1 of
control box A)
EPI SHUTTER
(Connect to EPI motorized
shutter)
EPI SHUTTER
MODEL ECLIPSE Ni-E
NIKON CORPORATION
TOKYO, JAPAN 9 1 0 0 0 1
M A D E I N J A P A N
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est confirme à la norme NMB-003 du Canada.
-High Temperature-
HALOGEN 12V100W
NI-LH
9 5 2 0 0 1
USB
(Connect to DS-L3 or PC)
DSC1
(Connect to EXT.I/O of
DS-L3/U3)
Ni-E (Connect to BOX of Ni-E main body)
OFF ON
FASTENING
POSITION SW
N i - E CONTACT
ARM1
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following
two conditions:
(1) this device may not cause
harmful interference, and
(2) this device must accept any
interference received,
including interference that
may cause undesired
operation.
This Class A digital apparatus
complies with Canadian ICES-003.
Cet appareil numérique de la
classe A est confirme à la
norme NMB-003 du Canada.
MODEL NI-CTLA
5 4 0 0 0 1
MADE IN JAPAN
100-240V~ 5A 50/60Hz
LAMP
EX
(Connect to motorized
excitation wheel)
STAGE
(Connect to motorized
XY stage controller)
DIA SHUTTER
(Connect to DIA
motorized shutter)
Fastening position mode switch
(ON: fastening position mode,
OFF: normal mode)
CONTACT ARM1
(Connect to CONTACT ARM1
of contact arm)
AC inlet
(Connect to AC power using a
power cord)
LAMP
(Connect to dia-illumination
lamphouse)