(2) Buttons on the [MICROSCOPE CONTROL] Screen
In order to control the microscope from DS-L3, press the [MIC]
or [CAM-MIC] button on the [MICROSCOPE CONTROL] top
screen to display the [MICROSCOPE CONTROL] or [CAM-MIC
CONTROL] screen. The same operation is available from either
screen, but the [MICROSCOPE CONTROL] screen is used as
an example to summarize the operation in this document.
The [MICROSCOPE CONTROL] screen displays the buttons as
shown below. The button alignment is set to the default setting.
When you want to use a function that is not shown, see "23.1
Setting Up the Microscope - (3) Configuring the Button
Functions - (3-3) Buttons on the Screens on DS-L3" to display
your desired button.
X: X coordinate of the motorized XY stage
Y: Y coordinate of the motorized XY stage
Z: Z coordinate of the microscope's
elevating section
A button for
opening an
operation sub
screen
(nosepiece, FL
turret, etc.)
Press the button
to open a sub
screen at the
bottom of the
screen.
Sub screen
Operation Button
Press a button to operate the
corresponding motorized device.
The selected button is displayed
with a blue frame.
Example of a sub screen with a slider (Lamp adjustment)
Chapter 3
Individual Operations
These buttons are
enabled when DS-L3
has control of the
lamp.
Slider
Available operations:
- Dragging the yellow marker being pressed
- [Press the [◄][►] buttons.
- Pressing the area to the left or right of the yellow marker (for greater
movement than when using the [◄] or [►] button)
167
MICROSCOPE CONTROL top screen
Moves to the [SETUP MENU] - [MOVEMENT]
screen.
Closes the sub screen.
Closes the
[MICROSCOPE
CONTROL]
screen.
Operation
buttons (optical
path, etc.)
Press a button to
operate the
corresponding
motorized device.
The selected
button is
displayed with a
blue frame.
ON/OFF or
OPEN/CLOSE
button (lamp,
motorized shutter,
etc.)
Indicates the
current status with
an icon. Each time
the button is
pressed, the
status switches
and the
corresponding
motorized device
operates.