Nikon Eclipse Ni-E Instruction Manual page 156

Using [FUNC SET] of the ergo controller on the DS-L3 [MICROSCOPE SETUP] screen allows you to change the default
setting of the operation button function.
Function Allocated to the CW/CCW
Functions Allocatable to the CW/CCW Button and Other Buttons/Switches
Function Allocated to the CW/CCW Button
Operate barrier filter wheel
Operate excitation filter wheel
Rotate epi-fluorescence cube turret on the 1st layer
Rotate epi-fluorescence cube turret on the 2nd layer
Rotate nosepiece
Switch ND filter value in the HG precentered fiber
illuminator
Rotate condenser turret
Adjust aperture diaphragm on the condenser
Operate motorized ND filter wheel
Operate DSC optical zoom
Adjust DIA field diaphragm
Chapter 3
Individual Operations
Button
142
Function Allocated to a Switch Other Than
the CW/CCW Button
Function Allocated to a Switch Other Than the CW/CCW
Button
Switch Z speed (focus knob operation mode)
Switch XY speed (stage knob operation mode)
Switch optical path (BINO: 100% to binocular)
Switch optical path (FRONT: 100% to tube adapter)
Switch optical path (REAR: 100% to rear port)
Switch optical path (B100/F100)
Switch optical path (F100/R100)
Switch optical path (R100/B100)
Switch optical path (B/F/R)
Open/close shutter of epi-fluorescence cube turret on
the 1st layer
Open/close shutter of epi-fluorescence cube turret on
the 2nd layer
Operate EPI motorized shutter
Operate DIA motorized shutter
Open/close shutter in the HG precentered fiber
illuminator
Open all EPI side shutters
Rotate nosepiece
Rotate nosepiece reversely
Capture
Reset Z-axis coordinate
Reduce noise (SLEEP mode)