Channel Encoders - SoundCraft VI6 User Manual

CHANNEL ENCODERS

Channel encoders always control a parameter on their own channel strip. The function of the channel
encoders can be globally selected via the [INPUT GAIN], [GATE THRS] and [PAN] keys on the Encoder
Mode panel (see Figure 7- 2).
Figure 7-2: Encoder Mode Panel.
[USER1] and [USER2] are currently used to set the channel encoders to control the Low-cut Filters and
the High-cut Filters respectively.
[SETUP] is reserved for future use.
HINT: If [ALL BUSSES] is active or a MATRIX output is soloed, the channel encoders are disabled and have
no function (the previous function is remembered however).
HINT: If Stereo Aux sends are assigned to the channel faders (using FLW Output Solo), the channel encod-
ers control the PAN for their channel's contribution to the soloed Stereo Aux bus.
Page 7 - 2 Soundcraft Vi6™ User Guide