Parametric Eq - SoundCraft Ui12 User Manual

Ui12, Ui16 User Manual
CHANNEL EDIT > PARAMETRIC EQ
EQ adjusts the amplitude of an audio signal at particular frequencies. Ui input channels, FX Return
channels, and Sub Group master channels have a four-band parametric EQ, plus High Pass Filter
(HPF), and a De-Esser controlled from the same screen. The display also incorporates an optional
Real Time Analyser (RTA), which shows a spectral view of the incoming signal. In addition, the EQ can
be switched to a three-band (fixed frequency, fixed Q) 'Easy EQ'.
EASY EQ ON/OFF
Turn Easy EQ feature on or off
Easy EQ is a three-band, fixed frequency, fixed Q mode with a Mid bell-type band plus low and high shelving
bands. Switching Easy EQ OFF preserves the 'curve' in the parametric EQ, However, turning Easy EQ ON resets
the current curve because parametric EQ settings cannot be mapped to the Easy EQ format.
RTA - REAL TIME ANALYSER
Turn RTA feature on or off
The RTA display shows a real-time spectral view of incoming audio. This is sometimes useful for targeting specific
characteristics with EQ bands quickly. Note that RTA is only active on one channel at a time. If activated it will
deactivate any other channel's active RTA (on other clients)
DE-ESSER ON/OFF
Turn De-Esser processing on or off
When off, no draggable De-Esser ball will be shown in the main EQ graphic interface.

5.2: PARAMETRIC EQ

5.2: PARAMETRIC EQ