Outputs & Dmx Menu - SoundCraft Si Performer User Manual

OUTPUTS & DMX MENU
The OUTPUTS menu provides information to all parameters and functions concerning system
buses and outputs.
NOTE: The OUTPUTS button is greyed-out and not accessible unless a bus or DMX
controller is SELected.
Mix (or DMX) Name: The name of the currently SELected mix bus, DMX channel or DMX
Isolate:
NOTE: When isolated the channel settings are still stored when a cue is updated.
Mix Width*:
Pan Mode*:
LCR Pan Width*:
Set Mix Sends Pre/Post*:
NOTE: Fader Pre/Post can be changed per channel per mix see Inputs & VCA
50
master; press the scroll/adjust encoder to access the QWERTY
keyboard to edit the name
Isolates the mix from automation playback and lights the ISOlate
indicator on the ACS when status set as 'Enabled'.
Sets the mix as either Mono or Stereo for Mixes 9-14 and Matrix 1-4.
Making a mix stereo does not change the number of separate mixes
on the console but does change the bus width. This is how the channel
to mix bus pan works in follow mode:
Mono input to mono mix bus – no bus pan function
•
Mono input to stereo mix bus – bus pan control functions as pan
•
Stereo input to mono mix bus - no bus pan function, L & R sides
•
of the stereo input mix to the bus at -3dB
Stereo input to stereo mix bus – bus pan control functions as balance
•
(Similar for bus to matrix mixes.)
LCR or LR (not available for stereo bus mixes or matrix) When set to
LCR pan operates as LCR pan when both the LR and MONO routing
keys are active, pan operates as standard LR pan if only the LR routing
key is active or if the Pan Mode is set as LR.
Adjust the pan law when in LCR is active to increase / decrease the
contributions to the LR and Mono buses when panning.
Nominally sets all sends from channels to MIX'n' as either Pre fader
(FaderGlow bus master is yellow) or post fader (FaderGlow bus master
is green).
Soundcraft Si Performer User Guide V1.1 1112