Master Faders; Monitor Outputs; Headphones Jack - SoundCraft M-SERIES User Manual

22
MONO SUM
0
The Mix Left and Right signals are summed to a MONO output on a 3 pole 'A' gauge jack
is set by the dedicated rotary control. Monitoring of the Mono output, if required, must be done at the
external equipment it feeds, or the signal brought back to a spare console input.

MASTER FADERS

q
The MASTER FADERS set the final level of the MIX outputs, and separate faders are provided for each
output. These should normally be set close to the `0' mark if the input GAIN settings have been correctly
set, to give maximum travel on the faders for smoothest control.

MONITOR OUTPUTS

w
The Monitor Outputs are on 3-pole 'A' gauge jacks and are balanced connections
MIX OUTPUTS & INSERTS
e
The Mix LEFT and RIGHT outputs are sent from the XLR sockets as balanced signals. The Mix INSERT points
are on 3-pole 'A' gauge jacks and are unbalanced.
PLAYBACK INPUTS
r
These two RCA phono sockets are unbalanced Left and Right line-level inputs, used for connecting the
playback devices selected using button
tape recorders etc.
MONO SUM OUTPUT
t
The MONO Sum output is on a 3-pole 'A' gauge jack output and is balanced.
RETURN MASTER / MUTE
y
This rotary control adjusts the overall level of the four stereo return inputs to the Mix. There is also a mute
switch which can be used to quickly compare the level of the Mix, with and without effects.

HEADPHONES JACK

u
This output is on a 3-pole 'A' gauge stereo jack socket and accepts headphones of approximately 200W
impedance.
5
(see also p.21) e.g. DAT or CD players, Minidisc, Cassette
USER GUIDE
t
. Output level