Rear Connectors - SoundCraft CPS800 User Manual

4 - 8

Rear Connectors

INPUT (3 pin female XLR)
Pin 1 Ground
Pin 2 Signal Hot
Pin 3 Signal Cold
SPLIT O/P (3-pin male XLR)
Pin1 Ground
Pin2 Signal Hot
Pin3 Signal Cold
INSERT SEND (1/4" TSR Jack)
Tip Signal Hot
Ring Signal Cold
Sleeve Ground
INSERT RETURN (1/4" TSR Jack)
Tip Signal Hot
Ring Signal Cold
Sleeve Ground
DIR O/P (3-pin male XLR)
Pin1 Ground
Pin2 Signal Hot
Pin3 Signal Cold
The SPLIT O/P is a passive parallel split from the input XLR, intended
for feeding to the FOH multicore if the console is being used in the
monitor position.
The GND LIFT switch disconnects pin 1 of the XLR from chassis ground.
This affects the split output only.