Cable Specifications - SoundCraft VI Series Technical Information

Cable Specifications
Cat 5e:
Maximum 80m (260 feet) using
Neutrik Etherflex Cat 5e cable
(ZNK CT2672601), terminated with
Amphenol RJF connectors.
Suitable 80m cable mounted on a
lightweight drum is available from
Soundcraft, part number RZ2713.
These cables are not included with the
standard console and must be ordered
separately.
Two 5m patch cables are supplied with
each console as standard.
Option Cards and Interfaces
Cat 7:
Maximum 130m (422 feet) using AMP
Netconnect 57893 PiMF cable.
Note: this cable is solid core and
only suitable for fixed installations,
not for touring use.
Not available from Soundcraft.
Optical Multimode Fibre:
Maximum distance 1500m (4875
feet) using continuous run of 50/125
multimode fibre, terminated with
Fibrecast™ expanded beam
connectors.
The Processor Card (fitted as stand-
ard unless otherwise requested) adds
8 channels of high-performance Lexi-
con® Effects and 35 (or 27) 30-band
BSS Audio™ graphic equalisers to the
Soundcraft Vi6™ (or Soundcraft Vi4™).
The CobraNet™ card allows up to 32
channels of input or output signals (or
a combination of both) to be received
by or sent from the console onto a
CobraNet™ network. The card must be
used as the Conductor for the network.
By default, the card is configured for
32 outputs.
The Soundcraft A-NET 16V card allows
a direct digital connection to the
Aviom® A-NET® Pro16™ Personal
Monitor System. The card includes a
switchable test tone and stereo pair
linking via DIP switches.
Optical Multimode Fibre (cntd..)
Suitable cable is available from
Soundcraft on a lightweight drum in
the following lengths:
50m RZ2714
150m RZ2702
200m RZ2701
Note: One of the above cables
must be ordered if the optical
stagebox link is requested.
Single Mode Fibre:
Maximum distance 10km
Note: Special Optical MADI card is
required, please contact Soundcraft
for delivery time.