Soundcraft Vi6™ Features And Specifications; Audio Channels; I/O Capability; Insert Points - SoundCraft VI6 User Manual

Soundcraft Vi6™ FEATURES AND SPECIFICATIONS

Audio Channels

Max number of simultaneous mixing channels
64 mono inputs into 35 mix busses. Pairs of mono inputs can be linked to create stereo channels.

Insert points

24 insert send/return pairs can be configured (using available I/O) and assigned to any of the 64 inputs
or 35 output channels

Direct Outputs

All 64 input channels can have direct outputs in addition to their internal bus routing, assuming sufficient
I/O is available (eg via 64ch optical MADI card, see below)
Busses
32 Grp/Aux/Matrix*, plus main LCR Mix and LR Solo busses.
* a maximum of 16 matrix outputs can be configured.

I/O Capability

The following I/O is available and can be patched to any channel input, direct output, bus output or insert
point as required:
Local Rack Inputs
16 analogue line inputs
3 analogue mic/line inputs
1 Talkback Mic input (mounted on control surface – 2 parallel sockets front/rear)
8 pairs of AES/EBU inputs (=16 channels)
64ch MADI In via optical SC connectors
Local Rack Outputs
16 analogue line outputs
8 pairs of AES/EBU outputs (= 16 channels)
LCR Local monitor A analogue line outputs
LR Local Monitor B analogue line outputs
TB line output
64ch MADI Out via optical SC connectors
Stagebox Inputs
64 analogue mic/line inputs (with remote gain control, PAD, 48V and pre-A-D 80Hz HPF)

Stagebox Outputs

32 analogue line outputs
Soundcraft Vi6™ User Guide Page 1 - 5