Changing Videophone Settings; Operation - Docomo F-01A Instruction Manual

M (1 sec. or more) to display the simple menu. Press SD to move the cursor,
P to select. Press M to return to the previous screen on the simple menu or
confirmation screen.
2
Perform necessary operations
Switching camera image and substitute image :
P (1 sec. or more)
Disconnecting :
M
Holding a call :
When hold is canceled, press M to send the same image sent before hold,
press I to send a camera image, and press a or n to send a
substitute image.
M (1 sec. or more)e1e"Yes"
Switching to voice call :
M(1 sec. or more)e2e1-5
Adjusting brightness :
M(1 sec. or more)e3e1-3
Changing image to send :
M(1 sec. or more)e4
Turning the light on/off :
Do not look directly into Simple light.
M(1 sec. or more)e5
Switching to Macro shooting :
Setting image quality to send/receive :
2e1-3
M (1 sec. or more)e7eSet required itemseM (1
Setting screen display :
sec. or more)
Setting items P73 "Changing videophone settings"
M(1 sec. or more)e8Select a number witheSD,
Entering DTMF signal :
select "#" with M (1 sec. or more)eP
Pressing P or a numeric key during a call opens the DTMF entry screen.
M(1 sec. or more)e9
Switching to Speakerphone :
Setting display during a call
The settings are retained after a call.
1
Perform necessary operations during a call
Switching the main screen and the sub screen :
Changing the main screen size :
Each time you press, the display size switches in the order of Large
Standard Small Large.
m8eSet required itemseC
Setting display :
Setting items P73 "Changing videophone settings"
I
M(1 sec. or more)e6e1 or
C
C (1 sec. or more)
Setting substitute or on-hold image <Image setting>
m [Settings & NW services] 615e1-5eSet
1
required itemseC
Image : Set image type
List images : Select when Image is other than "Default image" or "Default
Chara-den" (only for Substitute image)
✔INFORMATION
If Chara-den set for the substitute image is deleted, the substitute image is reset to the
default Chara-den. If the still image or Default Chara-den is deleted, the substitute
image is reset to Default image.
If the still image set as Answer machine image, Response hold image, On-hold image
or Movie memo image is deleted, the substitute image is reset to Default.

Operation

Changing videophone settings

You can set actions to be performed when videophone call fails, or set the screen
to appear during a videophone call.
Auto redial as voice is provided to ensure access to the other party. When this is
set to "ON", the number is re-dialed as voice call if a call cannot be answered
because the other party's terminal does not support videophone, or the other
party is using the mova service via Dual Network Service. However, this option
may not work properly if you dialed ISDN-sync 64K access point, ISDN
videophone incompatible with 3G-324M (as of Oct, 2008), or a wrong number, etc.
Note that you may be charged for these calls.
m [Settings & NW services] 613eSet required
1
itemseC
Auto redial as voice : Set whether to redial as voice call for unsuccessful
videophone attempt
Display setting : Set the screen
Sub screen : Set Sub screen
This setting is available when Display setting is "Both sides".
Screen size : Set the main screen view size
Visual preference : Set the incoming image quality of the other party
Display light : When "Terminal settings" is selected, this option depends on
Brightness of Display & Key light
Voice/Videophone Calls/PushTalk
73