Error messages
If error message appears mentioned below
The "(number)" or "(xxx)" in error messages is a code used to distinguish the error sent from i-mode Center.
A Network error has occurred.
Press g to close GPS function, and retry later.
All locked.
All lock is ON. P114
Apply secret attribute to mail address and SMS?
This message appears when external phonebook
entries with secret attribute set are loaded or when
secret attribute is set for phonebook entries. P122
Authentication interrupted.
Displayed when stopping authentication by pressing
c in the authentication screen.
Authentication type is not supported.(401)
The authentication type is not supported and
connection to the specified site or website is
disabled.
Call cost reached limit. Call disconnected./Call cost
reached limit. Call on-hold disconnected./Call cost
already reached limit. Unable to call.
Reset the total calls cost. P336
Cannot execute because of other tasks.
When updating pattern data, terminate all other
functions in advance.
Caution! This SMS includes Phone Nos. or URLs. Be
careful if you do not recognize the sender.
With Message scan of Set scan set to "Valid", you
make an attempt to display SMS containing a
phone number and/or URL description. (It does not
appear when mopera mail or voice mail reception
notification is received in SMS.)
422
Appendix/Troubleshooting
Certificate is rejected.(tampered)
The site certificate has been altered. Connection is
suspended.
Cessation of broadcast.
The selected channel is stopped.
Check address.
An incorrect or no mail address was input to the mail
group.
Check SMS center setting.
Setting of SMS Center in SMS settings is incorrect.
P166
Connection failed.(403)
Failed to connect to the site for a certain reason such
as connection rejection.
Connection failed.(503)
Failed to connect to the server due to the
maintenance or the rate of congestion. Retry later.
Connection failed.(562)
Failed to connect to the i-mode Center. Please retry in
a place with good radio wave conditions.
Connection interrupted.
Please retry in a place with good radio wave
conditions. If the error persists, retry later.
Content length exceeds maximum size for i-motion.
Download has suspended because the data exceeds
savable size while downloading i-motion. P186
Continue using i-αppli and transmit data? Yes/
Terminate i-αppli
After "Data transmission is frequent. Continue
transmission?" appears, an attempt was made by i-
αppli to make communications.
Corrupted data or microSD.
Accessing microSD card is disabled due to a problem
in data saved in the microSD card or the card itself.
Initialize the microSD card or insert a new microSD
card. P300, 306
Corrupted data or microSD. Saving to phone
memory.
When "microSD" is the destination for saving still
images or movies and the microSD card cannot be
accessed, the destination automatically switches to
"Phone".
Corrupted data.
i-αppli cannot be started from invalid data read with
Bar code reader.
Corrupted data. Restore default setting?
Select "Yes" to return to the default setting. Functions
cannot be started without restoring the default
setting.
Current UIM is not registered as IC owner.
Unable to run/download/update.
Details are given in IC owner in Osaifu-Keitai Menu
This message appears when UIM is replaced after
registering as IC owner and an attempt is made to
download, update or activate Osaifu-Keitai
compatible i-αppli. P265
Data in IC card is full. Unable to run/download/
update. Delete service?
Memory space in IC card is insufficient when starting,
upgrading or downloading Osaifu-Keitai compatible
i-αppli. Delete data from IC card according to
instructions on the screen and delete the Osaifu-
Keitai compatible i-αppli. P259, 265
Need help?
Do you have a question about the F-01A and is the answer not in the manual?
Questions and answers