Docomo F-01A Instruction Manual page 220

*2 Searching channels, after you move etc., may enable you to receive waves from a
broadcasting station that is not saved. When you cannot receive waves, the previously
watched channel reappears. A broadcasting station that is found through wave reception can
be saved to a channel. Note that the channels may not be searched in the order of the remote
controller numbers because channels are searched in the order of frequency.
*3 Available when previous and next pages are stored in the cache.
*4 By the displayed contents, an operation such as returning to the previous page may be
performed.
m1
Checking TV station list :
Checking program information :
Note that information not yet set or read may not be displayed.
m3
Switching Channel list :
The next procedure P216 Step 2 in "Specifying Channel list"
Operation of the Channel list P216 "Using Channel list"
Checking recordable time/number of items :
Deleting recorded video/still image :
video/still imagee"Yes"
On the list screen, press m to check details, and press I to switch between list
and thumbnail display. Note that, thumbnail display is unavailable in "Video
(microSD)". P318
Setting/Canceling OFF timer :
m62
Creating introduction mail :
A mail creation screen appears with information for 1Seg watching of the currently
watched program (Media To) already entered in the message text.
Saving currently watched channel to Channel list :
channel
When a channel already saved is selected, a confirmation screen appears. Up to
62 items can be registered.
m86e1-3
Switching services to watch :
You can operate when other programs (services) are broadcasted in the same
channel.
Switching 1Seg ECO mode ON/OFF :
Light becomes disabled when this mode is set to ON to darken the display for power
saving. In a well-lighted area, power saving effects may not be great.
Outputting audio using a Bluetooth device :
The Bluetooth device list appears.
The next procedure P344 Step 2 in "Connecting the FOMA terminal and a
Bluetooth device"
218
1Seg
m2
m43
m44eSelect a foldereSelect
m5e1-5
m85eSelect a
m87
m88
When a Bluetooth device is connected, a confirmation screen for outputting
sound appears according to the settings of "Voice output to BT". P225
m9
Displaying key function help :
❖
Watching 1Seg in flip style
P, S and D can be used as on the vertical display except when a menu or panel
is displayed.
Selecting a channel : Slide right or lefteTouch
Adjusting volume : Slide up or downeSlide up or down on the volume adjustment
panel
Starting video recording : Touch the screene"MENU"e"Start REC"
Video recording P222
Listing Channel numbers : Touch the screene"TV stations"
If the list has 10 or more channels, touch
Switching standard horizontal display/horizontal full-screen :
screene"Switch view"
Switching standard horizontal display/horizontal full-screen :
screene"Subtitles"
Turning 1Seg ECO mode ON/OFF : Touch the screene"MENU"e"ECO-mode ON"/
"ECO-mode OFF"
Displaying touch operation help : Touch the screene"MENU"e"Help"
Terminating 1Seg watching : Touch the screene"MENU"e"End"e"Yes"
❖
Time shift function
While watching 1Seg (except selecting a channel), when Voice, Videophone, or
PushTalk call is made or received, video picture that was being received during the
call is played automatically for approximately 3 minutes.
Upon completion of the call, a confirmation screen for replaying the movie received
during the call appears.
Replay of the program continues even after the part received during the call ends.
Unavailable during Fake call.
Data broadcasting is not available.
For a long call duration, first images may be overwritten.
During fast forward play, audio may not be heard clearly.
Operations during time shift play
r : Switch ordinary play to fast forward play
In flip style, slide to right or press S for 1 second or more.
C : Switch fast forward play to ordinary play
/
/ to switch pages.
Touch the
Touch the