Docomo F-01A Instruction Manual page 204

❖
Focus to the location touched
This function is available when Touch AF is set to ON in flip style. P209
1
Touch the location where you want to focus on the still image
shooting screen
The touched location or touched face detection frame is focused. When
focused, a confirmation tone sounds.
The next procedure P200 Step 3 and the following steps in "Shooting still
images with Camera"
When face detection frame is not displayed, an orange focus frame appears.
It changes to "+" when focused.
Canceling focus : Touch the shooting screen
When full auto focus is set to "ON"
Shooting takes place after focusing. The focus confirmation tone does not sound.
Setting continuous shooting and 4 frames shooting
Still images can be shot continuously.
Continuous (Auto)/Continuous (Manual) : The set number of images are shot.
Images are saved in created animation format when the saving destination is set
to FOMA terminal and saved as individual still images to microSD card.
4 frames (Auto)/4 frames (Manual) : Four continuous images are shot and saved as
1 still image composed as a 4-frame cartoon.
Still images can be shot at interval of approximately 0.4 seconds in Continuous
(Auto) or 4 frames (Auto). However, the interval of shooting may differ depending
on the shooting condition.
Available shooting sizes and number of images to be shot are shown below.
Shooting size
×
QCIF (176 144)
× ×
V/H-QVGA (240 320, 320 240)
× ×
V/H-VGA (480 640, 640 480)
×
Stand-by/H-WVGA (480 864, 864
* Can be set in Continuous shot photos of Still image settings. (Even if a number larger than the
maximum is set, only up to the maximum can be shot.)
202
Camera
Continuous (Auto) 4 frames (Auto)
Continuous (Manual) 4 frames (Manual)
*
2-9
*
2-9
*
2-6
×
*
480) 2-6
On the still image shooting screen, m6e1-4 or 6
1
(in flip style Me"MENU"e"Continuous"eTouch an item to set)
You can set from an icon on the screen. P207
✔INFORMATION
When 1 or selected images shot in Continuous (Auto) or Continuous (Manual) are
selected and saved, the images not selected are discarded.
You can separate an image in create animation format into individual still images. A
number from "-1" to "-9" is added to each image file name. P290
During shooting, when a call or PushTalk call is received, the set date and time of
countdown timer, alarm clock or Schedule come, the style is switched between normal
and flip, or FOMA terminal is folded, operation in each case is as below.
- Continuous (Auto) or 4 frames (Auto) shooting continues, and a confirmation screen for saving
appears after the call or alarm ends.
- Continuous (Manual) shooting is interrupted, and a confirmation screen for saving appears.
- 4 frames (Manual) shooting is interrupted, and still images already shot are discarded.
- No ring alert or alarm sound is emitted before the shutter sound ends.
When Auto timer is set, shooting in Continuous (Manual) or 4 frames (Manual) is
unavailable.
Setting continuous panorama shooting
2-8 still images continuously shot changing the direction of the camera little by little
can be formed to 1 still image by connecting them vertically or horizontally.
During continuous panorama shooting, approximately one fifth of the previously
shot still image is transparently displayed on the seam. Shoot the next image
overlaying the transparent part.
To connect horizontally, shoot rightward continuously, and to connect vertically,
shoot downward continuously.
4
4 Overlap the transparent parts
4
With grid line displayed, the transparent part for the next shooting can be
checked.
Image size, maximum image size and maximum number of shot images are as
shown below.