Docomo F-01A Instruction Manual page 129

Show image : Set an image for incoming calls without caller ID.
When "i-motion" is selected, select a movie/i-motion from the movie list.
List images : When "Select image" is selected in Show image, select List images
field and set an image.
✔INFORMATION
When "Call Rejection" is set, the rejected calls are recorded as missed call.
When there is an incoming videophone/PushTalk call without caller ID notification, the
operations are performed only when "Call Rejection" is set. For other settings, ring tone
and incoming image depend on each ring tone or incoming call image setting.
If movie/i-motion containing only sound is set in "Movie ringtone" for the incoming
settings, "Standard image" is set, however, the image (except Flash graphics) can be
changed by selecting "Select image" from Show image.
Regardless of this setting, i-mode mail and SMS are received.
Ring alert delay
Setting not to answer calls from the party not
saved in phonebook
Effective to "One-ring phone scam".
This option cannot be set when Unregistered caller is set to "ON".
m [Settings & NW services] 15eSet required itemseC
1
Delayed ring alert : Set whether to enable Delayed ring alert.
Delay time (sec) : Set the time between the arrival of calls and the start of
ringing. (1-99 seconds)
Missed call : Set whether to display a missed call that was terminated before
the time set in Delay time in Received calls.
❖
When Delayed ring alert is set
When an incoming voice, videophone or PushTalk call is received from a party not
saved in phonebook or such call is received without caller ID notification, the
reception is notified only with screen display for the specified period of time. After
the set time has elapsed, normal ring alert action starts.
Before the specified time elapses, ordinary call receiving operation such as
answering an incoming call or replying it with Answer machine can be
performed.
In Personal data lock, this function operates even for an incoming call from a party
saved in the phonebook.
This option also starts when a call arrives from a party that secret attribute is set
with Private call act. set to "Alert+Show No." in Privacy mode (when Call & Logs
is "Hide set contact").
✔INFORMATION
Regardless of this function, when the functions or services below are set, they precede.
- Public mode, Answer machine
- Voice Mail Service, Call Forwarding Service
When there is an incoming call or PushTalk call from a party to be rejected because of
settings from Specified caller or Anonymous caller, rejective operation takes priority
over the settings from this function.
When Delay time has been set to the same seconds as that for Voice Mail service or Call
Forwarding Service, the ring alert may sound.
127
Security Settings