Activate 1Seg - Docomo F-01A Instruction Manual

Specifying Channel list
You cannot specify Channel list while recording.
When there is only one Channel list saved, it is automatically set as the one to be
used.
m [LifeKit] 97
1
A list of Channel list appears.
Displaying Channel list while watching 1Seg :
m3
2
Move the cursor to Channel listea
Channel list to be used is set and channel number list appears.
If setting while watching 1Seg, 1Seg watching screen appears immediately.
For the list of Channel lists,
Using Channel list
Displaying the list of Channel lists P216
Opening the channel number list :
Updating Channel list : Move the cursor to Channel listem4
The next procedure P215 Step 2 and the following steps in "Creating Channel list"
m5e1 or 2e"Yes"
Deleting Channel list :
To delete 1 item, move the cursor to a channel list.
Authentication is required for deleting all items.
Changing Channel list name : Move the cursor to Channel listem2eEnter
Channel list name (up to 10 two-byte (20 one-byte) characters)eC
Operations on a channel number list
Starting 1Seg watching : Select a channel
Changing a channel number : Move the cursor to a channelem1eSelect a
new channel
Deleting a channel : Move the cursor to a channelem2e"Yes"
✔INFORMATION
While watching 1Seg, operations below are unavailable for the currently active
Channel list.
- Updating or deleting Channel list
- Changing channel numbers
- Deleting registered channels
216
1Seg
On 1Seg watching screen,
appears in the set Channel list.
Select Channel list

Activate 1Seg

Watching 1Seg
A confirmation screen appears when you watch 1Seg for the first time. P214
You can operate from flip menu. P40
T (1 sec. or more)
1
The channel watched last appears. A confirmation screen appears if there is
no set Channel list. Press "OK" to create Channel list. P215 Step 2 and
subsequent steps in "Creating Channel list"
✔INFORMATION
You can also activate 1Seg watching in the ways below.
- Select 1Seg watching information etc. displayed on Program guide i-αppli, mail, MessageR/F, i-
Channel, site, Web site, etc. (Media To) P180
- Watching reservation P222
A confirmation screen for 1Seg use, storage area, etc., or for which "Yes (Always)" is
selected does not appear again unless the UIM is replaced or Reset permit status is
performed.
If you select "Yes (default)" on a confirmation screen, data broadcasting or data
broadcasting site information may be updated etc. without confirmation and packet
communication fees may be charged.
Reading and operating screen
When going outside broadcasting service area while selecting a channel, a black
screen is displayed for both video and data broadcasting.
and the message from the broadcasting stations may appear at the top of the
display.
<Standard screen>
cd
ef
h
a
b
g
i j k lmno