Notifying The Other Party Of Your Phone Number; Caller Id Notification; Checking Your Own Phone Number; User Information - Docomo F-01A Instruction Manual

<When the correction has never been performed and date and time are displayed with "-
-" or "?">
Flash graphics, Machi-chara, etc. that use clock or date/time are not displayed correctly.
Also, functions requiring date/time information such as Auto start, Reserve,
downloading or playing data with Replay Restriction, operating a user certificate, etc.,
cannot be activated.
Date and time of each data are not recorded and displayed as "----/--/--" or "----------------
". A segmental number furthermore (number to segmentalize) may be appended.
<When setting date/time with Auto time adjust set to "OFF">
When the date/time are deleted because of removing of the battery pack or leaving the
battery for a long time after the battery exhausted, set the date/time again after
charging the battery.

Caller ID notification

Notifying the other party of your phone number

You can set FOMA terminal to display your number (Caller ID) on the other party's
terminal when making a voice call, videophone call or PushTalk call.
For details, refer to "Mobile Phone User's Guide [Network Services]".
Caller ID is your important information. Carefully consider whether you want to
include caller ID information when making a call.
The caller ID is displayed only when the phone of the other party is a digital
mobile phone etc. enabled to display the caller ID.
Setting operations for this function is disabled from a location out of service area.
m [Settings & NW services] 8411e1 or 2
1
Press m [Settings & NW services] 8412 and select "Yes" to
check the current settings.
❖
Priority of Caller ID notification
There are multiple methods to notify your phone number to the other party. If you
set or perform these methods simultaneously, the caller ID operations are
performed with the priorities below. The displayed setting and actual Notify/Not
notify may differ.
a When setting a caller ID notification method in Call option for dialing P64
b When "186" or "184" is prefixed to phone number to dial P63
c Caller ID settings of phonebook (for PushTalk, dialing 1 party) P86
d Activate/Deactivate of Caller ID notification
56
Before Using the Handset
✔INFORMATION
If an announcement of requesting caller ID is heard when making a call, make a call
again after setting your caller ID to be notified.

User information

Checking your own phone number

You can check your phone number (My phone number), Name, Mail address, etc.
m [User information]
1
s0
Checking during a call etc. :
✔INFORMATION
For details of how to check i-mode mail address, see "Mobile Phone User's Guide [i-
mode] FOMA version".
When 2in1 is in Dual mode, you can press a to switch User information between
Number A and B.
With 2in1 ON, if replacing UIM (2in1 subscriber 2in1 subscriber), set 2in1 to OFF then
set it to ON again to obtain the correct Number B, or obtain Number B from User
information. P334
Also, if replacing UIM (2in1 subscriber 2in1 non-subscriber), set 2in1 to OFF to update
to the correct user information. P367