Docomo F-01A Instruction Manual page 247

Displaying i-αppli description <Software description>
I (1 sec. or more)eSelect a foldereMove the cursor to i-
1
αpplieC
Displayed items differ by i-αppli.
To check the site certificate of the i-αppli downloaded from SSL page, press
C on Software description screen.
Setting operating condition of i-αppli <Software
settings>
You cannot select the item not supported by the i-αppli.
When 2in1 is in Dual mode or B mode, "Set i-αppli display" and "Set NW
transmission during i-αppli display" cannot be selected.
I (1 sec. or more)eSelect a foldereMove the cursor to i-
1
αppliem6eSet required itemseC
Set i-αppli display : Set if you set i-αppli to stand-by display. Only one i-αppli
can be set.
Set NW transmission during i-αppli display : Set if you allow automatic
communication while the i-αppli stand-by display is running.
Set NW transmission : Set if you allow automatic communication while the i-
αppli is running.
Use icons : Set if you allow i-αppli to use icons for mail, MessageR/F, battery,
Silent mode and signal level.
Start from browser : Set if you allow starting the i-αppli from site (i-αppli To).
Start from ToruCa : Set if you allow starting the i-αppli from ToruCa (i-αppli To).
Start from mailer : Set if you allow starting the i-αppli from mail (i-αppli To).
Start from Location Service menu : Set if you allow starting the i-αppli from link
item of location information in site, MessageR/F or ToruCa (i-αppli To).
Start from external : Set if you allow starting the i-αppli from external device (i-
αppli To).
Start from data broadcasting site : Set if you permit activation from 1Seg data
broadcasting site (i-αppli To).
Allow ring tone / image changes by software
change settings such as ring tone and images for the stand-by display.
*
Confirm all changes : Set if you display a confirmation screen each time the
settings of ring alert or images are changed.
*
: Set if you allow i-αppli to
Allow access to phone book / call records by software
to refer to phonebook, redial or received call logs automatically. This setting
also applies to ToruCa saved in FOMA terminal.
*
Location usage setting : Set if you allow GPS compatible i-αppli to use
location information automatically.
*
Program guide key setting : Set if you set i-αppli in program guide i-αppli
activated from 1Seg. Only one i-αppli can be set.
*
Map setting : Set if you set i-αppli to be the i-αppli used for viewing a map.
Only one i-αppli can be set.
This setting also applies to Select Map. P285
Only i-αppli compatible with GPS supported this setting can be set.
*
i-αppli call setting : Set if you activate i-αppli from i-αppli call.
* Available only for i-αppliDX.
✔INFORMATION
When setting Set i-αppli display to "Yes", a confirmation screen for setting appears
(except when i-αppli is already set to the stand-by display). When it is set, i-Channel
ticker or Information display is set to "No/Not display" if it was set to "Yes/Display".
When setting Set i-αppli display to "No", i-Channel ticker or Information display is
restored to "Yes/Display".
If you set "No" for Set NW transmission, i-αppli may not be started and timely
information such as stock prices or weather information may not be provided by i-
αppli.
If you set "Yes" for Use icons, since icons for unread messages, unread MessageR/F,
remaining battery level, Silent mode, and antenna icon may be sent to IPs (Information
Providers) through the Internet, it may give the information to a third party. Some i-
αppli requiring icons may not operate when "No" is set.
When "No" is selected in Program guide key setting, a cancellation confirmation screen
appears.
When "Yes" is selected in Map setting, a message appears indicating that selected
location information may not be displayed.
Some i-αppli are unavailable even when i-αppli call is set to "Yes".
*
: Set if you allow i-αppli
245
i-αppli/i-Widget