Using I-Αppli Call - Docomo F-01A Instruction Manual

✔INFORMATION
Even with auto start set, automatic activation does not occur in the cases below,
causing to appear on the stand-by display and to be recorded in Start failure hist.
- When the screen except the stand-by display appears
- When it is unavailable due to UIM operation restriction (except for preinstalled i-αppli) or UIM
cannot be recognized.
- When the interval of auto start is too short
- When All lock, Omakase Lock, Personal data lock or Privacy mode is ON (when i-αppli is
"Authorized access")
- When 2in1 is in B mode (only for i-αppli to use mail function)
- When i-αppli usage is stopped by IP (Information Provider)
Even if you change "Repeat" to set multiple i-αppli to be automatically started at the
same time, only one of them can be activated at one time. The information of the i-αppli
that failed to be activated is recorded in Start failure hist., however,
on the stand-by display.
Displaying the start failure history
When auto start of the i-αppli fails,
name of the i-αppli, date and time, and causes are recorded.
Up to 20 items can be recorded. When exceeding the limit, record is overwritten
chronologically.
When displaying Start failure hist. or when the next auto start is successful,
the stand-by display disappears.
m [i-αppli] 41
1
To delete histories, press C and select "Yes".
Using i-αppli call
This is a function to ask activation of i-αppli from a third party in order to call the
opponent when playing a versus game connecting to a network.
You can use this function with i-αppli call compatible i-αppli.
You can reject reception of i-αppli call collectively. For details, refer to "Mobile
Phone Use's Guide [i-mode] FOMA version".
Sending i-αppli call for calling
1
Operate i-αppli and select "Yes" on a confirmation screen for
sending i-αppli call.
does not appear
appears on the stand-by display and the
Receiving i-αppli call
1
Receive i-αppli call
turns on, the light turns on or blinks according to Mail alert, the ring alert
sounds and a confirmation screen for responding appears. On the confirmation
screen for responding, the phone number (the name when saved in
phonebook) of the sender and i-αppli name are displayed.
The volume when receiving i-αppli call follows the setting of Mail/Msg alert
vol. of Adjust volume.
When i-motion is set to mail ring alert, it operates according to the default
setting of Mail alert.
2
"Respond"
Targeted i-αppli starts.
When the targeted i-αppli is not saved, a confirmation screen for
downloading it or connecting to a site appears. Select "Yes" to download. A
packet communication fee is charged separately.
Not activating i-αppli : "Reject"
Holding calling : "Hold"
You can respond from i-αppli call log. Note that you cannot respond after
on expiration date.
✔INFORMATION
A confirmation screen for responding does not appear in the cases below.
- When the screen except the stand-by display appears
- When date and time are not set
- In Public mode
- In All lock, Omakase Lock, Personal data lock, Privacy mode (when setting i-αppli to "Authorized
access"), Lock on close or Auto keypad lock
- When "No" is set for i-αppli call setting of targeted i-αppli.
- When the targeted i-αppli is not saved and i-αppli call DL set is "Reject"
Some i-αppli starts without displaying a confirmation screen for responding.
Responding to i-αppli call may require packet communication fees.
257
i-αppli/i-Widget