Setting Gps - Docomo F-01A Instruction Manual

: Unable to start because 2in1 is in B mode
: Individual IC card locked
: Osaifu-Keitai compatible i-αppli
: GPS compatible i-αppli
: Message i-αppli
(orange) : i-αppli
/ / : Search for i-αppli from i-mode site P242
Each time you press I, the view switches in the order of graphical display
list display thumbnail display.
Setting whether to position when starting <Map
activate setting>
m [LifeKit] 782e1 or 2
1

Setting GPS

Setting positioning mode <Position accuracy>
In "Standard mode", positioning is performed in a short period of time.
"Quality mode" takes time for positioning. As a result, it may provide higher
accuracy than "Standard mode".
<Example> Setting positioning mode for Position location
m [LifeKit] 762
1
Setting positioning mode for Notify location :
7712
Setting positioning mode for Location request :
7722
1 or 2
2
286
Map/GPS Function
: i-αppliDX
m [LifeKit]
m [LifeKit]
Setting actions in positioning <Positioning alert>
<Example> Setting actions for Position location
m [LifeKit] 763
1
Setting operation for Notify location :
Setting operation for Loc. request-accept :
77251
Setting operation for Loc. request-verify :
77252
2
Set required itemseC
Ring alert : Set if you sound melody.
When "Melody" is set, select a melody.
Vibrate alert : Set a vibrator operation pattern.
Ring time (sec) : Set time in range of 0-30 seconds.
Set time in range of 0-20 seconds for Loc. request-verify.
Light alert : Set a lighting or blinking pattern and color of the light.
"Sync melody" cannot be selected. "OFF" cannot be selected for the case of
Loc. request-accept or Loc. request-verify.
When setting "Light pattern 1" or "Light pattern 2", light color cannot be
selected.
✔INFORMATION
When positioning is made again or retried with Position location due to wave
conditions etc. only lighting/blinking of the light occurs.
m [LifeKit] 7713
m [LifeKit]
m [LifeKit]