Pushtalk; Making A Pushtalk Call - Docomo F-01A Instruction Manual

✔INFORMATION
Videophone calls cannot be made through an external device during a voice call.
If you subscribe to Call Waiting Service, an incoming videophone call from an external
device during voice call is recorded as a missed call. An incoming voice call,
videophone call or 64K data communication during videophone call from external
device is recorded as a missed call.

PushTalk

PushTalk
This is a service that you can communicate with multiple parties (up to 5 parties
including yourself). Press PushTalk key (P) to take turns talking. Each time you
press P (to speak), PushTalk communication fee is charged.
For details of PushTalk or Supported models, refer to NTT DOCOMO website or
"Mobile Phone User's Guide [Network Services]".
❖
PushTalk Plus
A service allowing you to make a PushTalk communication with 20 parties including
yourself. You can use PushTalk more conveniently by using common phonebook
on the network or confirming the state of the members. You must subscribe to
PushTalk Plus to use this service.
* For details of operating procedure, refer to the guidebook which you can get when subscribing
to the service.
Reading PushTalk screen
a
b
c
a Speaker field
No icon : Floor is open.
Phone number/name/"Anonymous"/
: A member takes the floor.
"Myself" : You are speaking.
b Group icon, Group name
d
(When the speaker cannot be identified)
Display only on the screen of the caller of the group call.
c Participants
Phone number/name/"Anonymous"
d Participants status
*
: Calling
: Answered the call and participating
*
: No response/Communication ended/The terminal is out of service
area or turned OFF
*
: In Public mode (Drive mode)
* Displayed when the PushTalk call is made among 3 or more parties.

Making a PushTalk call

It operates according to Activate/Deactivate or Caller ID settings of phonebook.
Priority of the method to notify a caller ID P56
1
Enter a phone number
deSearch phonebookeMove the cursor to a member
Using phonebook :
P
2
When the receiver answers the call, a connecting tone sounds and
communication starts.
To make a call using the speakerphone function regardless of Silent mode or
P-Talk speakerphone setting, press P for 1 second or more.
Caller ID notification can be set for each call. P64
3
Talk over a PushTalk call
n : Switch the speakerphone function ON/OFF
j / SD : Adjust Listen volume (apply to Listen volume of Adjust volume)
You can also talk in flip style during a PushTalk call. Press S to decreases
volume and D increases volume in flip style.
With FOMA terminal folded, the speaker is used for answering regardless of
settings of Silent mode or P-Talk speakerphone. Speaker's name is displayed
on the sub-display.
Voice/Videophone Calls/PushTalk
75