Recording Video - Docomo F-01A Instruction Manual

Recording video

Recording is unavailable on the data broadcasting full-screen.
Record setting P226
On 1Seg watching screen, press P (1 sec. or more) (in flip style,
1
touch "MENU"e"Start recording")
1Seg recording starts.
While recording, channel switching, Auto setting, using OFF timer and
service switching are unavailable.
P (1 sec. or more) (in flip style, touch "MENU"e"End only
2
recording")
Recording stops and watching continues.
Ending watching only and keeping recording :
flip style, touch "MENU"e"End only reception")
appears on the stand-by display.
To end recording before specified recording end time, select
"Yes".
Ending recording and watching :
"MENU"e"End REC/Reception")
✔INFORMATION
When the memory space is not enough or exceeding the savable number, you cannot
record. Delete unnecessary videos or still images. P218
Recording stops when storage area is exhausted while recording.
In case the saving destination is microSD card, recording may not be performed while
functions such as PDF data browsing with a heavy workload on FOMA terminal or other
functions using microSD card are operating.
In the cases below, both or either of movie and sound stops, however, recording
continues.
- When a voice call, videophone call, PushTalk or 64K data communication is received
- When a voice call, videophone call or PushTalk call is made
- When the date and time specified in Alarm clock or schedule
- When mail, MessageR/F is received (with Display priority of mail set to "Show message")
- When a melody is played
- When i-motion is played/displayed
- When i-αppli is activated from data broadcasting
* When using watching reservation schedule, when you select "Yes" on a confirmation screen,
recording is stopped if the channel is different from the one being recorded.
When i-αppli that cannot be used concurrently with recording is started, a confirmation
screen for watching and continuation of recording appears
222
1Seg
fe"End only reception" (in
and press
fe"Yes" (in flip style, touch
*
come
When a link to 1Seg watching information displayed on a site or mail is selected while
recording, select "Yes" on a confirmation screen to stop recording and start watching
the linked channel. If the linked channel is the same as the one being recorded,
recording continues.
At the time for recording reservation while recording, reserved recording starts. When
the channel currently recording and the channel for recording reservation are different,
a confirmation screen appears if Record setting of recording reservation is set to
"Operation".
To record data broadcasting, record it for approximately 1 minute or more under strong
wave reception conditions. If the recording time is too short, data broadcasting may not
be displayed.
If FOMA terminal goes outside broadcasting service area immediately after starting
recording and the recording is stopped without receiving the airwave, the recorded
data may not be saved.
For some programs, movie and/or sound may be recorded from a point a little before
recording operation is done.
While a function that cannot be activated at the same time as recording is running, a
confirmation screen appears.
Recording still image
Recording is unavailable during video recording or on the data broadcasting full-
screen. Captions or data broadcasting are not saved.
On 1Seg watching screen, P
1
When exceeding the savable number/area P312
When there is an incoming videophone or PushTalk call immediately after
pressing P, still images may not be recorded.
Watching reservation/Recording reservation
Setting timer for watching or recording 1Seg
program
You can start 1Seg watching, receive notification of start of a program or start
recording automatically.
Up to 100 watching and/or recording reservations can be saved in total, but the
savable number varies by the number of saved items in Scheduler. P438
You can also use channel information shown in Program guide i-αppli, site or
mail to register reservations.