Docomo F-01A Instruction Manual page 165

Receive Area Mail
When receiving early warning "Area Mail"
When receiving Area Mail of Earthquake Early Warning
turns on, the light blinks in red, the dedicated buzzer alarm sound is emitted, the
vibrator operates and the contents display screen appears.
The contents display screen is cleared by pressing any of g, c, f.
The volume of the buzzer alarm sound is set to "Level 6" in Mail/Msg alert vol. It
cannot be changed.
The vibrator operates with the operating pattern of "Sync melody".
In Silent mode, FOMA terminal operates according to the setting of Silent mode
or Personalized silent mode. Note that, even with Vibrate alert of Personalized
silent mode "OFF", vibrator operates in "Sync melody". And, if any item in sound
setting of Personalized silent mode is set to other than "Silent", the dedicated
buzzer alarm sounds.
When receiving Area Mail except Earthquake Early
Warning
turns on, the light blinks in red, the dedicated Area Mail ring alert sounds, the
reception completion screen or contents display screen appears.
It depends on the setting of the distributor which of the distribution completion
screen or the contents display screen appears when receiving an Area Mail.
The contents display screen is cleared by pressing any of g, c, f, and the
reception completion screen is cleared by pressing any key or doing nothing for
approximately 15 seconds.
The volume of the Area Mail ring tone operates according to the alert volume in
Mail/Msg alert vol. of Adjust volume.
The ring time of the Area Mail ring tone operates according to Ring time (sec) of
Mail ring alert of Mail/Msg ring alert of Ring alerts & Sounds.
In Silent mode, FOMA terminal operates depending on the setting of Silent mode
or Personalized silent mode. Note that the vibrator operates with the pattern of
"Sync melody".
✔INFORMATION
Area Mail is saved in the folder of Inbox. Regardless of the memory space of whole
Inbox, when exceeding the savable number of Area Mail, the unprotected received
Area Mail is overwritten chronologically.
Area Mail
Setting early warning "Area Mail"
Setting if you use Area Mail <Receive setting>
a821eCheck "Notice"eSelect "Use Area Mail
1
function?" fielde1 or 2eC
Adding/Deleting Area Mail to use <Receive entry>
Up to 20 items can be added.
Receive entry is not required for receiving emergency information (emergency
earthquake flash report, disaster/evacuation information) only.
<Example> Save
a822
1
CeAuthenticateeSet required itemseC
2
Area Mail name : Enter any name in up to 15 two-byte (30 one-byte) characters.
Message ID : Enter ID of 4 digits provided by the service provider.
Editing : Select Area MaileAuthenticateeSet required itemseC
Deleting : Move the cursor to an Area Mail nameem2eAuthenticate
"Emergency information" saved by default cannot be edited or deleted.
Setting Beep time
a823eEnter the time (1-30 seconds)eC
1
163
Mail