Docomo F-01A Instruction Manual page 512

Disconnection reason list
Packet communication
Value
26 APN is not present or is incorrect.
27
30 Disconnected by network.
33 Terminal does not subscribe to packet communication.
36 Normal disconnection.
64K data communication
Value
1 Specified number does not exist.
16 Normal disconnection.
17 Communication is impossible because remote device is busy.
18 You made a call but did not receive a response within the specified time.
19 The remote device is called but no response.
21 The remote device rejected incoming calls.
63 The service and option of the network are not valid.
65 Unavailable processing speed was specified.
88 You made a call to a terminal or received a call from a terminal with different terminal
properties.
Error messages list
No. Text display
10 SIM not inserted
15 SIM wrong
16 incorrect password
100 unknown
Supplement to AT command
I <cid> is the number used to control dialup connection (APN) for packet communication to be registered
in FOMA terminal. "1-10" can be registered in FOMA terminal. An APN "mopera.ne.jp" (PPP connection)
to connect to mopera is registered in cid1 and an APN "mopera.net" (IP connection) to connect to mopera
U is registered in cid3 by default.
<APN> is an optional string for each connection to indicate dialup connection.
Command name : +CGDCONT=[parameter]
Outline
Sets dialup connection (APN) for packet communication.
Format
+CGDCONT= [<cid> [,"<PDP_TYPE>" [,"<APN>"] ] ]
Parameter description
<cid> : 1-10
<PDP_TYPE> : IP or PPP
<APN> : Optional
Example of execution
The command used to register an APN named "abc" for PPP connection (when <cid> =2).
AT+CGDCONT=2,"PPP","abc"
OK
Description
Description
No UIM
Other than DOCOMO SIM (IC card equivalent to UIM) is inserted.
Incorrect password
Unknown error
43
Description