Docomo F-01A Instruction Manual page 214

Copy/Paste information P355
Adding information to phonebook :
informationem3e1 or 2e1 or 2
To update phonebook, select the party to save.
Saving all data to phonebook at a time :
The phonebook entry screen appears with the information entered.
Sending i-mode mail : Select a mail address or "Compose message"
The mail creation screen with the mail address entered appears.
Connecting site or Internet website :
Press I to connect with Full Browser.
Registering URL as bookmark :
a Move the cursor to a URLem33
Select "Add bookmark" to save.
b Select a folder where the bookmark is added.
The next procedure P175 Step 2 in "Registering in Bookmark"
Starting i-αppli : "Start i-αppli"
Making a voice, videophone, PushTalk call :
condition for dialingem
Making a call under set conditions P64
Sending SMS : Select a phone numbereSelect Call type
fielde4eme"Yes"
SMS can be created and sent to the selected phone number.
Composing and sending SMS P164
Saving a still image file : Select a still image filee"Save"
The next procedure P178 Step 2 and the following steps in "Downloading
images"
When saving to phone, select the saving destination from either "Deco-mail
picture" or "Data transfer" folder of My Picture. Images that fit to Deco-mail
pictogram standards ( P288) are saved to "Deco-mail pict" folder.
Selecting "Display" displays the still image file.
Saving melody data : Select melody data
The next procedure P179 Step 2 in "Downloading data"
When saving to phone, the saving destination is "Data transfer" folder of
Melody.
Selecting "Play" plays the melody data.
Saving ToruCa : Select ToruCa
The next procedure P179 Step 2 in "Downloading data"
212
Camera
Move the cursor to
"Add to phonebook"e1 or 2
Select a URLe"Yes"
Select a phone numbereSet a
✔INFORMATION
If the code is not scanned well, try to change the distance between the code and
camera, the angle or direction of camera, etc.
In the cases below, the confirmation sound is not emitted when the code is read.
- In Silent mode or Public mode (Drive mode)
- When Keypad sound is set to "OFF" (including the setting of Personalized silent mode)
- When "Operation sound" in Adjust volume is set to "Silent"
Using the scanned data saved
m [LifeKit] 1eC
1
2
Select the scanned data
Using scanned data P211 Step 3 in "Scanning codes"
Deleting scanned data : Move the cursor to the scanned
dataem3e1 or 2e"Yes"
Authentication is required to delete all items.
✔INFORMATION
When Bar code reader is activated from i-αppli, the scanned data is saved and used by
i-αppli.
A data file is named as scanned date/time + file number + extension. The extension is
"jan" (JAN code), "qr" (QR code), "nw7" (NW7 code) or "c39" (CODE39 code). When
there is already a data saved on the same date/time, the file number is incremented by
1. The file name cannot be changed.