Silent Mode - Docomo F-01A Instruction Manual

Operation during a PushTalk session : m1
5e1 or 2
Setting Low battery alert :

Silent mode

Muting ring tone from the FOMA terminal
You can set FOMA terminal not to emit a sound by enabling the vibrator for
incoming calls or muting the keypad sound.
Starting/Canceling Silent mode
# (1 sec. or more)
1
Silent mode is started/canceled. When started,
(in Personalized silent mode) appears on the stand-by display.
Silent mode can also be started/canceled by folding FOMA terminal and
pressing S for 1 second or more by default.
You can start/cancel it from the menu on the sub-display. P35
❖
When General silent mode is activated
An incoming call is notified with vibration, muting all sounds emitted from FOMA
terminal such as ring alert, Keypad sound, Open/Close sound, alarm, buzzer or the
sound for reading a code. Also, microphone is sensitized, and you can call in a small
voice.
In the cases below, the operation of vibrate alert is "Pattern A".
- When receiving voice call, videophone call, PushTalk call, mail, during 64K data
communication or when receiving i-concier
- While positioning with melody set to GPS alert
- When the time specified in Countdown timer elapses
- When the date and time specified in schedule come
The vibrator operation for receiving Area Mail of emergency earthquake flash
report is "Sync melody".
When the time specified in Alarm clock comes, vibrate operates according to the
setting of Alarm clock.
Melody is not played automatically even when sent/received mail or MessageR/F
is displayed with "Auto play" set for Attachment auto-play.
When playing movie/i-motion with sound or program recorded from 1Seg, a
confirmation screen for playing a sound appears. Select "No" to play movie only.
When activating 1Seg, a sound emission confirmation screen appears. Select
"Yes" to adjust the volume. Select "No" not to emit a sound. Note that a sound is
emitted if 1Seg activation is set to "Auto start" in Set notify alarm of watching
reservation.
When playing Music or Melody or Music&Video Channel program, a confirmation
screen for playing appears. Select "Yes" to play.
✔INFORMATION
Shutter sound is emitted even in Silent mode.
The alarm sound of Call cost limit is emitted in General silent mode. In Personalized
silent mode, it operates according to the settings of "Call alert volume" of Personalized
silent mode.
(in General silent mode) or
<Example> Setting Personalized silent mode
1
2
3
Silent mode
m [Settings & NW services] 14
2
1
Setting General silent mode :
Omit Step 3.
Set required itemseC
When Vibrate alert is set to "ON", it operates according to Vibrate alert/effect.
Items set to "OFF" in Vibrate alert/effect vibrate in "Pattern A".
When Vibrate alert is set to "Contact setting", it operates according to Vibrate
alert/effect.
Regardless of the setting of Vibrate alert, when receiving Area Mail of
emergency earthquake flash report, the vibrator operates in "Sync melody".
You can set the alert volume for voice, videophone and PushTalk calls in Call
alert volume.
Even if "Silent" is set to Mail alert volume, if any other setting item is set to
emit sound, the buzzer alarm sounds when receiving Area Mail of emergency
earthquake flash report.
When Alarm sound, Schedule reminder or i-αppli sound is set to "ON", the
sound is emitted according to each setting.
When setting Alarm sound to "ON", the Countdown timer sound is also
emitted.
For Answer machine, it operates according to this setting regardless of the
setting of Answer machine.
95
Sound/Screen/Light Settings