Setting Pin Code - Docomo F-01A Instruction Manual

❖
PUK (PIN Unblocking Key)
PUK is a number of 8-digit code used to unblock PIN or PIN2 lock. You cannot
change PUK by yourself.
If a wrong PUK is entered 10 times consecutively, UIM is locked.
Enter
3 errors Enter
PIN/PIN2
in a row PUK
code
✔INFORMATION
When using Password manager with the fingerprint authentication and a terminal
security code access available, change the terminal security code. For the new terminal
security code, avoid use of an easily-guessed number such as the low-order 4 digits of
the phone number and take care not to let others know the terminal security code. Keep
a separate note of the set security codes.
* Note that DOCOMO is not liable for any damages caused through incorrect use of the data by a third
party.
Terminal security code change
Changing terminal security code
m [Settings & NW services]
1
461eAuthenticateeEnter the new terminal security
code
2
Enter the new terminal security code in New security code-check
fieldeC
Setting a new
OK
PIN/PIN2 code
is available
10 errors
Contact a
in a row
DOCOMO shop

Setting PIN code

Setting whether to require entry of PIN code when
turning power ON <PIN1 code ON/OFF>
If a wrong PIN code is entered 3 times consecutively, the PIN code is locked. Press
g and enter PUK.
The PIN code entry screen is displayed only when the current setting is changed.
m [Settings & NW services] 453e1 or
1
2eEnter PIN code
❖
When PIN1 code ON/OFF is set to "ON"
When FOMA terminal is powered on, the PIN code entry screen is displayed. The
stand-by display appears when correct PIN code is entered, but all operations are
unavailable when not.
✔INFORMATION
When the date/time specified in Alarm clock or schedule has come with Alarm auto
power ON is "ON", the power is turned ON and the alarm starts sounding before the
PIN code entry screen is displayed. When f is pressed to stop the alarm, the PIN
code entry screen is displayed. Even if a downloaded melody, i-motion or music is set
as an alarm, operations are carried out as specified in the default settings.
111
Security Settings