Docomo F-01A Instruction Manual page 493

Setting TCP/IP protocol
1
Click (Start)
2
Right-click the dialup connection created and click "
3
Check the setting of each item in "
4
Click "
5
Click "
6
Uncheck all items (
" (Dialup connection)".
(Network)" tab
(Option)" tab Click "PPP
) Click "OK".
24
(General)" tab.
When multipul modems are connected to a PC,
set as follows.
For USB cable connection : Select only
" -FOMA F01A (Modem-FOMA F01A)"
at " (Connection method)" field.
For Bluetooth connection : Select "
Bluetooth
(Modem- (Standard modem via Bluetooth
link you use))" or "
(Modem- (Bluetooth modem provided by
Bluetooth device manufacturer))" at "
(Connection method)" field.
Uncheck ( ) other than selected modem.
COM port number assigned to the modem
displayed at "
field differs by the environment of a PC you
use.
Uncheck ( ) "
information)".
Set each item as shown below.
Uncheck ( ) "
6 (TCP/IPv6) (Internet Protocol Version 6
(TCP/IPv6))".
When settings of IP and DNS information have
been requested from the provider, etc. select
"
IPv4) (Internet Protocol Version 4 (TCP/IPv4))",
click " (Property)" and set various
information.
When settings of "QoS
(QoS packet scheduler)" and other items have
been requested from the provider, etc., check/
uncheck as required.
(PPP settings)".
(Property)".
- (
)
- (Bluetooth
Bluetooth )
(Connection method)"
(Use dial
4 (TCP/