Anonymous Caller - Docomo F-01A Instruction Manual

Restricting calls/mail/data transfer
Accepting/Rejecting calls from specified phone
numbers
Accepting/Rejecting incoming call can be set for each phone number saved in
FOMA terminal phonebook.
To use this function, specifying Accept/Reject call for each phone number and
Specified caller setting are required. The settings and the operations of Accept/
Reject call are as listed below.
Setting
Specified caller Cancel settings Accepted
Reject call
Accept call
* The call or PushTalk call from a specified phone number is disconnected without activating ring
alert and the caller hears a busy tone.
This function is activated only when the other party sends caller ID.
Rejected calls are recorded as missed calls.
If Ring time is set to "0 Sec." for Voice Mail or Call forwarding, Voice Mail or Call
forwarding is activated and the call is not stored as a received call.
Combination of Caller ID Request Service and Anonymous caller is recommended
when used.
Specifying phone numbers to accept/reject calls
<Accept/Reject call>
Accepting/Rejecting incoming call is set for phone numbers saved in FOMA
terminal phonebook.
deSearch phonebookeMove the cursor to a phonebook
1
entryem353eAuthenticateeSelect a phone
numbere1-3
To accept/reject calls from specified phone numbers, activate settings of
Specified caller in succession to the above step.
If a phone number with Accept/Reject call set is edited or deleted, this setting
is canceled. Set Accept/Reject call again for the new number.
126
Security Settings
Accept/Reject call for each phone number
Accept call Reject call No setting
Accepted Accepted
*
Accepted Rejected Accepted
*
Accepted Rejected Rejected
Enabling Accept/Reject call from specified numbers
<Specified caller>
This setting applies to all phone numbers with Accept/Reject call set.
Reject call and Accept call are not enabled simultaneously.
m [Settings & NW services]
1
551eAuthenticatee1-3
✔INFORMATION
If a call without caller ID is received from a party you set Reject call, the FOMA terminals
response is according to the setting in Anonymous caller regardless of this setting.
When Accept call is selected with no phonebook entry set to Accept call, a message
appears indicating to reject all incoming calls. Select "Yes" to reject all incoming calls.
Regardless of this setting, i-mode mail and SMS are received.

Anonymous caller

*
Setting operations for incoming calls not to
notify caller ID
For each reason for hiding caller ID, you can set a receiving operation for incoming
calls notifying no caller ID.
For the ring alert and incoming call image for an incoming voice call that does not
notify the caller ID, this setting precedes the settings of Call alert (Incoming call).
m [Settings & NW services] 52eAuthenticatee1-
1
3eSet required itemseC
(Incoming operation) : Set operations for incoming calls or PushTalk calls that
do not notify caller ID.
When "Disable settings" is specified, the ring tone sounds according to
setting.
When setting to "Ring alert off", ring alert does not sound. Set an image in
"Show image".
When setting to "Melody", select a melody and set an image in "Show
image".
When setting to "Movie ringtone", select a movie/i-motion.
When setting to "Music", select a music data and set an image in "Show
image".
Setting Music P91