Docomo F-01A Instruction Manual page 369

Setting 2in1
Set each option with 2in1 ON.
m [Settings & NW services]
1
87eAuthenticatee"Yes"eOperate by selecting a menu
item
If 2in1 is already ON, 2in1 setting screen appears after the authentication.
<2in1 Mode switching>
1e1-3
[2in1 Mode switching] :
<2in1 setting>
2eSelect a modeePhonebookeSelect a phonebook
[2in1 setting] :
entryeCe"Yes"
Phonebook display depends on the mode you selected.
For "Common", Phonebook entries appear in both A and B modes.
: Phonebook entries in A mode
: Phonebook entries in both A and B modes
<Stand-by for mode>
31eSelect a foldereSelect an imagee"Yes"
[For Dual mode] :
32eSelect a foldereSelect an imagee"Yes"
[For B mode] :
<Set call/receive No.>
41e1-3
[Ring alert for No.B] :
Setting operations are the same as the one for Ring alerts & Sounds.
Ring alert sounds according to this setting regardless of the setting of Notify/
Not notify of caller ID.
42eSet required itemseC
[Identification mark] :
Text strings such as " (Dialing)" in Identification mark with Mark set to ON
is decorated on the incoming/outgoing call or calling screen.
The setting of Number A also applies to Identification mark.
<2in1 function OFF>
5e"Yes"
[2in1 function OFF] :
<Receive avoidance>
61eSet required itemseC
[Change rcv. avoidance] :
Incoming calls from the number with Receive avoidance applied is restricted in
any mode.
Mode link for avoid. should be deactivated.
62e"Yes"
[Check rcv. avoidance] :
You can change settings from the submenu.
: Phonebook entries in B mode
63e"Yes"
[Mode link for avoid.] :
When activated, only Number A is accepted in A mode and so is Number B in
B mode.
When activated, 2in1 mode switching is unavailable out of service area.
64e"Yes"
[Rcv. avoidance(Int.)] :
You need to deactivate Mode link for avoid.
If operated overseas, an international call fee for the country where you stay
is charged.
✔INFORMATION
<2in1 mode switching>
Even when 2in1 is OFF, you can set 2in1 to ON and activate 2in1 mode switching by
holding down 2 for 1 second or more and performing authentication. When 2in1 is
ON, you can activate 2in1 mode switching in the same way.
<2in1 setting>
When you subscribe to 2in1 for the first time, all saved phonebook entries at the time
are set to "A". If you re-subscribe to 2in1, the previous 2in1 setting is used.
❖
2in1 function in each mode
Only items with different actions depending on modes are listed (items with same
actions as in A mode are excluded).
Service
Voice/ Call Number A
Videophone
Calls *2
Receive Depend on Receive avoidance
*3
Phonebook Display "A" "Common"
*4
Name conversion "A" "Common"
New entry "A"
Receive all items via Depend on Ph.book 2in1 setting at sending side
infrared
communication or iC
transmission
Receive 1 item via "A"
infrared
communication/iC
transmission
Copy all items from Depend on 2in1 setting when copying
microSD card
A mode B mode Dual mode
Number B Select when
*1
dialing
"B" "Common" All
"B" "Common" All
"B" "A"
"B" "A"
*5
Network Services
*5
367