Docomo F-01A Instruction Manual page 127

Setting Lock on close "ON"
m [Settings & NW services] 411eAuthenticateeSet
1
required itemseC
Lock on close : Set whether to activate Lock on close.
Lock after phone close : Lock on close is activated when the specified time
elapses after FOMA terminal is folded.
Setting Auto keypad lock to "ON"
m [Settings & NW services] 412eAuthenticateeSet
1
required itemseC
Auto-keypad lock : Set whether Auto keypad lock is activated automatically
Time to lock : Auto keypad lock is activated when no operation is performed
until the specified time after the last operation elapses.
The last operation includes keypad operation, opening/folding, fingerprint
sensor operation (pointing, registering fingerprint, authenticating fingerprint)
and changing the style to flip.
Immobile sensor : When "ON" is set, Auto keypad lock is activated when no
operation is performed until the specified time elapses or there is no
operation of FOMA terminal.
No operation of FOMA terminal means when you do not walk or do not give
the terminal big shake instantaneously.
❖
When Lock is activated
When Lock on close/Auto keypad lock is activated, all keys except P, M and SD
are locked. Note that, even if S (1 sec. or more) is pressed, voice memo/movie
memo list screen is not displayed.
Lock on close is activated after set Lock after phone close time elapses every time
FOMA terminal is folded.
Auto keypad lock is activated and locks key operations automatically if no
operation was performed for the time set in Time to lock after the last operation.
When Lock on close/Auto keypad lock is activated on the stand-by display or on
the first level of flip menu in flip style from the stand-by display.
When Lock on close/Auto keypad lock is activated in other state, the locked screen
appears.
To cancel Lock on close, open FOMA terminal and perform authentication. If the
locked screen appears, directly enter terminal security code or perform
authentication by pressing m or s.
Unlocking in flip style P41 " Authentication"
✔INFORMATION
When Lock on close/Auto keypad lock is "ON", Lock on close/Auto keypad lock is
activated after the power is turned OFF and ON. Lock on close/Auto keypad lock is
activated after Omakase Lock is canceled if active.
If Lock on close is already activated, Auto keypad lock is not activated even if it is set.
Also, if Auto keypad lock is already activated, Lock on close is not activated even if it is
set.
Indicating activation of Lock on close with a light
<Security indicator>
You can set whether the state of Lock on close/Auto keypad lock is shown with a
light.
m [Settings & NW services] 43eAuthenticatee1 or
1
2
❖
When Security indicator is set
If FOMA terminal is closed and Lock on close is activated, the light blinks in blue for
approximately 2 seconds. When set to other than "Right after", if the set time
elapses, the light blinks in blue for approximately 2 seconds to indicate that Lock on
close/Auto keypad lock is activated. Note that, when the light blinks in red for
approximately 2 seconds, it indicates that Lock on close/Auto keypad lock is not
activated.
appears.
125
Security Settings