Service Numbers
You can make a call to DOCOMO-specified repair office or to general inquiries.
The item varies or is not displayed by some UIM types. P48
When 2in1 is in Dual mode, the caller ID selection screen is displayed.
m [Settings & NW services] 896eOperate by selecting
1
a menu item
] : 1e"Yes"e
[
is dialed
2e"Yes"eGeneral Inquiries is dialed
[
] :
Set arrival act
You can activate/deactivate or check the Arrival call act settings.
m [Settings & NW services] 898eOperate by selecting
1
a menu item
1e"Yes"
[Activate] :
2e"Yes"
[Deactivate] :
3e"Yes"
[Check setting] :
Arrival call act
Selecting actions for an incoming call during a
call
If subscribing to Voice Mail service, Call Forwarding Service and/or Call Waiting,
you can set how to answer voice/videophone calls and 64K data communications
received during a call.
Unless you subscribe to Voice Mail service, Call Forwarding Service or Call
Waiting, you cannot answer calls received during a call.
To use Arrival call acts, set Set arrival acts to Activate in advance.
m [Settings & NW services] 899eOperate by selecting
1
a menu item
[Answer] :
[Voice Mail] :
(DOCOMO repair office)
[Call Forwarding] :
[Call Rejection] :
Remote control
Setting remote control
You can access services such as Voice Mail service and Call Forwarding Service
from touch-tone land-line phones, DOCOMO mobile phones, payphones, etc.
When using Voice Mail or Call Forwarding Service overseas, Remote control must
be activated in advance.
m [Settings & NW services] 892eOperate by selecting
1
a menu item
[Activate] :
[Deactivate] :
[Check setting] :
1
When Call Waiting Service is activated, the service starts. When it is
deactivated, you can answer a voice call after terminating a voice call or 64K
data communication. Also, you can select actions from the submenu when a
voice call is being received. P67
2
The received voice/videophone calls are connected to Voice Mail service.
3
The received voice/videophone calls and messages via 64K data
communication are forwarded to the registered phone number. However,
data received via 64K data communication during another data
communication is not forwarded.
4
All calls are rejected.
1e"Yes"
2e"Yes"
3e"Yes"
365
Network Services
Need help?
Do you have a question about the F-01A and is the answer not in the manual?