Starting I-Αppli Quickly; Starting I-Αppli Automatically - Docomo F-01A Instruction Manual

Starting i-αppli quickly
i-αppli can be started by a simple operation from the stand-by display.
Registering i-αppli as one-key/two-key shortcut
You can register one item of one-key shortcut.
You can register one item of two-key shortcut for each key of keypad, up to 10
items in total.
<Example> Registering two-key shortcut
I (1 sec. or more)eSelect a folder
1
2
Move the cursor to i-αppliem82
Registering i-αppli shortcut :
Same operations are required also for canceling.
3
Select a destination to register
Icon numbers ( - ) correspond to keypads (0-9) used to activate
two-key shortcut.
When a destination already registered is selected, an overwriting
confirmation screen appears.
✔INFORMATION
Press m [i-αppli] 36 on the stand-by display to display the Shortcut list. Detail
info can be displayed and perform Cancel two-key s.cut from the submenu of the list
screen.
Starting i-αppli using one-key/two-key shortcut
<Example> Starting i-αppli using two-key shortcut
0-9eI (1 sec. or more)
1
Starting i-αppli using one-key shortcut :
256
i-αppli/i-Widget
Move the cursor to i-αppliem81
g (1 sec. or more)
Starting i-αppli automatically
Setting whether to start automatically <Auto start>
You can set whether to automatically start all i-αppli which are set to "ON" for User
in Set auto start info.
m [i-αppli] 32e1 or 2
1
Setting date and time of auto start <Set auto start info.>
Set the conditions such as ON/OFF of automatic start or start time for each i-αppli
and display the preset details.
The conditions that can be set depend on the i-αppli.
Some i-αppli may not be able to start automatically.
This function cannot be set when Auto start is "OFF".
I(1 sec. or more)eSelect a foldereMove the cursor to i-
1
αppliem5eSet required itemseC
User : Select if you perform auto start with the conditions below.
Time : Enter the time for auto start of the i-αppli.
Repeat : Set the condition for repetitive auto start of the i-αppli.
Weekly : Set the day of the week when Repeat is set to "Weekly".
Date : Set the date when Repeat is set to "Onetime".
Software : Set if you automatically start at the intervals preset for the i-αppli.
i-αppli 1-4 : For some i-αppliDX, up to 4 conditions of auto start can be set while
it is running. You can set if you enable those settings.