Docomo F-01A Instruction Manual page 284

When Location request is issued
<Example> When " (Permit)" is set for usage settings by services
Location request starts. blinks, the light turns on, the GPS alert sounds, and vibrator
operates.
Press c or f to stop Location request. Location information is sent under
some timing.
Receiver name
Requestor name
Requestor ID
When the requestor ID matches a phonebook entry, the requestor name saved in
phonebook appears. Note that, when the requestor ID matches the user
information, the requestor name does not appear.
Requestor ID may not be displayed.
When " (Check each time)" is set for usage settings by services, a screen
shown below appears. Select "Yes" to start Location request.
✔INFORMATION
Sending Location information requires no charge.
Location request is unavailable while positioning with Position location or Notify
location, while FOMA terminal is out of service area or during Self mode, i-mode
communication with i-αppli or infrared communication/iC transmission. If the battery
is exhausted or Omakase Lock is activated while positioning, it is stopped.
Information is not delivered to the other party under some wave conditions.
282
Map/GPS Function
If " (Check each time)" is set for usage settings by services when Location
request is issued during Public mode (Drive mode), location information is not sent. If
" (Permit)" is set, a screen appears and location information is sent, but the GPS
alert sound is not emitted, and the light or vibrator does not operate.
When using 2in1, Location request for Number A is available regardless of mode of
2in1.
When you are required to provide the location information by a party using
imadocokantan search, it operates as below.
- Every time you are required, a confirmation screen for location information appears. If you select
"Yes", a rough positioning result is immediately notified to the other party. After the positioning,
high-precision positioning results are notified to the other party.
- Even if the location request is interrupted after selecting "Yes" on the confirmation screen of location
request, a rough positioning result is notified to the other party. In this case, although it is recorded
in the Loc. history, the location information is not displayed.
Setting whether to permit/deny Location request
<Request permit/deny>
You can set if you provide location information when there is a request from other
parties.
This can also be set in Initial setting. P54
m [LifeKit] 7721eAuthenticate
1
1 or 3e"No"
2
When "Always permit" is specified, any Location request is permitted.
Without performing operations, Location information may be sent, and the
searcher may be given information.
When "Deny unsaved contact" is set, a location request is permitted,
however, the location request from a phone number that is not saved in
phonebook or User information is automatically rejected.
Canceling Location request or Deny unsaved contact :
1 or 3e"Yes"eSet required itemseC
Setting permission period :
Start : Set time for starting Location request.
End : Set time for ending Location request.
You can set the next day exceeding 24:00.
Repeat : Set repetition of operation of the set time.
When "Day of week" is selected, select "Day/Week", select the day of the week
to perform Location request and press C.
Date : Set a period of time to perform Location request. When "Specify start
date" or "Specify start/end" is set, the items below can be set.
Start : Set day for starting Location request.
2