Flow Of Setup For Data Communication - Docomo F-01A Instruction Manual

Flow of setup for data communication

This section described the setup work needed to perform packet communication
or 64K data communication by connecting the terminal to a PC via USB cable or
Bluetooth device.
For USB cable connection
a Downloading or installing FOMA
communication configuration file
Installing from attached CD-ROM
Downloading from NTT DOCOMO
website and installing
b Connecting a PC to FOMA terminal
c Checking FOMA communication
configuration file
Installing DOCOMO Connection Manager
Setting data communication by DOCOMO Connection Manager
Performing communication
For Bluetooth connection
a Preparing for Bluetooth
connection
b Checking modem
Setting communications without using
DOCOMO Connection Manager
Using CD-ROM
Attached CD-ROM contains software for Data Communication with FOMA
terminals, PDF version "Manual for PC Connection" and "Kuten Code List". For
details, refer to attached CD-ROM.
When the CD-ROM is inserted into the PC's CD-ROM drive, the warning screen
from Internet Explorer security setting may appear, but may be ignored. Click
"Yes".
Introduction of DOCOMO keitai datalink
"DOCOMO keitai datalink" is a software for backing up phonebook, mail and other
data in your mobile phone to a PC and edit them. It can be downloaded from NTT
DOCOMO website. For details and downloading of this software, refer to the
website below. You can also access to this site from the attached CD-ROM.
http://datalink.nttdocomo.co.jp/ (in Japanese only)
For details including downloading procedure, data that can be transferred,
operating environments, installing procedures and operations, refer to the
website above. For operations after installation, see Help in the software.
Using DOCOMO keitai datalink requires USB cable (optional).
385
PC Connection