Convenient Functions; Alarm Clock - Docomo F-01A Instruction Manual

Alarm clock

Ringing alarm clock at specified time
You can set 1Seg to start after Alarm clock sounds.
Up to 9 items can be set.
u (1 sec. or more)e1-7
1
Setting/Canceling : Move the cursor to a set alarm clockem.
appears at the left of the time when Alarm clock is set.
2
Set required items
Time : Enter the time to sound an alarm clock.
Repeat : When setting Repeat,
list.
When "Day of week" is selected, select "Day/Week", select a day of the week
and press C.
Message : Up to 7 two-byte (14 one-byte) characters can be entered.
Snooze(Snz) : Set whether to use snooze (alarm sounds for approx. 1 minute
and stops) for approx. 30 minutes with the specified intervals.
h to switch to Set sound screeneSet required items
3
Alarm sound : When this is set to "Phone setting", it operates according to
Alarm clock sound of Ring alerts & Sounds.
Setting Music P91
Volume : If you set to "Phone setting", it operates according to Alarm clock
sound of Adjust volume.
h to switch to 1Seg alarm screeneSet required items
4
Activate 1Seg : When this is set to "Yes", 1Seg starts when Alarm clock is
deactivated or stopped (including paused when snooze is activated) (1Seg
alarm clock).
Volume : When this is set to "Phone setting", it operates according to Alarm
clock sound of 1Seg alarm sound.
Channel : Set the channel to start with.
Time out : When the set time elapses, 1Seg is terminated.
appears at the right of Snz in the alarm clock
h to switch to Set others screeneSet required items
5
Vibrate alert : Setting "Phone setting" applies to Alarm clock in Vibrate alert/
effect.
Light pattern : If setting Light pattern to "Light pattern 1", "Light pattern 2" or
"Sync melody", the light blinks in multiple colors. Light color cannot be set.
Light color : Set the lighting color of the light.
C
6
When alarm clock is set, or
appears on the stand-by display.
❖
When the specified time arrives
The message and time appears on the display and the settings apply to the
operation.
When FOMA terminal folded,
Press f to terminate the alarm clock. When Activate 1Seg is set to "Yes", 1Seg
starts.
If no operation is performed for approximately 1 minute, any key except f or
D is pressed or FOMA terminal is double-tapped when folded, the alarm clock
stops or snooze starts. When Activate 1Seg is set to "Yes", 1Seg starts.
While alarm clock is stopped with snooze operation activated, "
Snooze" appears on the display and the light blinks slowly.
While alarm clock is stopped, press c or f to deactivate it. While alarm
clock is stopped with snooze operation activated, press f to deactivate.
✔INFORMATION
With movie/i-motion set for Alarm sound, movie/i-motion appears on the screen when
the alarm clock operates.
When starting 1Seg, a program not specified may be displayed.
If alarm clock and a schedule reminder are set for the same date and time, the alarm
clock sounds, succeeded by notification of the schedule reminder.
In Personalized silent mode, 1Seg alarm clock operates according to Alarm clock sound
in Personalized silent mode.
Countdown timer operation is made at the specified time during a call, PushTalk
session, fake call, while making/receiving/disconnecting a call or PushTalk call, making/
receiving 64K data communication, in data transfer mode or while using infrared
remote control.
(when a schedule reminder is also set)
and time appear on the sub-display.

Convenient Functions

325