Docomo F-01A Instruction Manual page 357

Copying/Cutting and pasting characters
Only the last item of the copied or cut characters are recorded until the power is
turned OFF, and they can be pasted any number of times.
Copying/Cutting characters
On the character entry screen, me1 or 2
1
On the message text entry screen, press m31 to copy or
m32 to cut.
2
Select the start point
meg
Selecting the whole sentence :
On the message text entry screen, press a to select the whole sentence.
3
Select the end point
The characters in the selected range are copied or cut.
Selecting from the start position to the beginning of the sentence :
Selecting from the start position to the end of the sentence :
Searching the specified character :
Quick search starts.
Operation is unavailable on the message text entry screen.
Pasting characters
When the pasted phrase exceeds the permitted number of characters, a message
appears indicating not all characters can be pasted. Select "Yes" to paste the
phrase with excessive characters deleted.
1
On the character entry screen, move the cursor to the position to
paste charactersem3
The characters are inserted at the cursor position.
Press m4 on the message text entry screen.
✔INFORMATION
When the type of the copied/cut characters matches with the character type used of the
paste destination field, pasting is available. Hiragana or kanji cannot be pasted into the
mail address entry field.
When a character string containing a line feed is pasted into the entry screen that
cannot contain any line feeds, the line feed is replaced by a blank.
meg
Ceg
Move the cursor to the end positioneI
KUTEN code input
Entering characters using KUTEN code
Characters, numbers and symbols on the Kuten code list can be entered using 4-
digit code.
For "Kuten Code List", refer to PDF version "Kuten Code List" in the CD-ROM
attached.
<Example> Entering " " (code number 0209)
On the character entry screen, m42eEnter the 4-digit
1
Kuten code (0209)eg
Press m52 on the message text entry screen.
Save word
Saving often-used words
Saving frequently used words makes it easy to produce them during character
conversion.
Up to 200 items can be saved.
m [Settings & NW services] 721e"<New word>"
1
a
b
a Select when saving new word
b Icon indicating the beginning of the line
c Saved words
Listed in the order of the Japanese syllabary.
To check the saved word, move the cursor to the word and press C. Edit it
by pressing g.
To delete a word, move the cursor to the word and press m, and select
"Delete". Select "Delete all" to delete all saved words.
2
Enter the word to register in the word field (up to 12 two-byte (24
one-byte) characters)
3
Enter the reading in the reading field (up to 8 characters in hiragana)
The word with the characters below entered at the beginning cannot be
saved.
c
355
Character Entry