Docomo F-01A Instruction Manual page 330

When a "31st" day or "February 29" in a leap year is set as the start date and
"Every month" or "Every year" is selected for repeat, the schedule is repeated
on the last day of the same year/month instead of the specified date (that is,
"30th" or "February 28").
Alarm image : To change the schedule reminder screen, select "Yes", select
"Image" and select the image.
C
6
When a schedule event with Alarm set is saved,
is also set) appears on the stand-by display.
❖
Saving schedule events from stand-by display <Quick
schedule>
You can save schedule events with simple key sequence without using calendar
screen.
1
Enter date/time in 8-digit numbereu
Main (New) screen of schedule appears.
For 10:00 on November 7, enter 11071000.
When 4 digits (2 digits for hour and 2 digits for minute) are entered, Main
(New) screen for the current day (or the next day if the entered time is before
the current time) appears.
The next procedure P327 Step 2 and the following steps in "Saving schedules"
❖
When the specified date and time come
The image, date/time and schedule appears on the display and the timer starts
sounding at a Schedule reminder set in Adjust volume. Actions are taken according
to the settings to Schedule reminder in Vibrate alert/effect or Call in Light alert.
With FOMA terminal folded, the alarm start time and schedule appear on the sub-
display.
Press f to stop the alarm.
When no operation is performed for approximately 1 minute, any key except
f or D is pressed or FOMA terminal is double-tapped when folded, the alarm
stops.
While the alarm is stopped, press g to display the details screen.
✔INFORMATION
The schedule with All day set to "ON" operates the schedule reminder at 0 o'clock on
the specified day.
328
Convenient Functions
With Movie/i-motion set for schedule reminder, movie/i-motion appears on the screen
when the schedule reminder operates.
When multiple schedule reminders are set for the same date and time, the contents of
other schedules can be checked by pressing h after stopping the alarm.
If a schedule reminder and alarm clock are set for the same date and time, the alarm
clock sounds, succeeded by notification of the schedule reminder.
Coutdown timer operation is made at the specified date and time during a call,
PushTalk session, fake call, while making/receiving/disconnecting a call or PushTalk
call, making/receiving 64K data communication, in data transfer mode or while using
or (when alarm clock
infrared remote control.
Setting default value for schedule reminder <Reminder
option>
uem65eSet required itemseC
1
Set by scheduler : Set default values for saving a schedule event from the
Set by quick-schedule : Set default values for saving by quick-schedule.
Checking registered schedule
Schedules in i-schedule can also be displayed, but submenu operations etc. are
different or restricted. P330
ueSelect the saved schedule day
1
calendar screen.
a
b
c
d
f
e
g
Day view screen (Normal)
Press h to switch the date.
Descriptions of the screen are as below.
a The number of schedule events, weather report for a week
When displayed in Display by type, "
(Number of todays schedules after filtering)" is displayed.
Day view screen (Classic)