1.20.1.6 Call Hold (HOLD)—by ISDN
Description
An ISDN call can be put on hold using the ISDN service of the telephone company, instead of
the PBX feature. This can be a part of a Call Transfer (CT)—by ISDN (
(CT)—by ISDN) and Three-party Conference (3PTY)—by ISDN (
Conference (3PTY)—by ISDN). This feature allows an ISDN call to be held, and a call to be
made to another outside party using only one communication channel of ISDN. A PT user can
easily use this feature by pressing the ISDN Hold button.
This feature complies with the following European Telecommunication Standard (ETS)
specifications: ETS 300 141 Call Hold (HOLD) supplementary service.
Conditions
•
ISDN Hold Button
A flexible button can be customised as the ISDN Hold button.
•
The availability of this feature is dependent on the contract with the telephone company.
•
The TRS/Barring feature is applied when making a call after activating this feature. (
1.8.1 Toll Restriction (TRS)/Call Barring (Barring))
•
ARS cannot be applied to the call dialled after activating this feature. (
Route Selection (ARS))
•
It is impossible to seize any other trunk during this feature.
Feature Guide References
1.19.2 Flexible Buttons
1.20 Integrated Services Digital Network (ISDN) Service Features
1.20.1.7 Call Transfer
1.20.1.8 Three-party
1.9.1 Automatic
Feature Guide
193