Table of Contents
Advertisement
2.2.9 PDN/SDN Button Delayed Ringing Assignment
Allows you to assign a delayed ringing function on the PDN/SDN button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
(PDN)
(SDN)
or
Press PDN or SDN
you wish to assign the
delayed ringing function.
<PT Display Example>
Immediate Ring
<PT Display Example>
1-ring Delay
If you want to change the delayed ringing type, enter another
type number again.
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• If more than one PDN button is assigned on a PT, Delayed Ringing can be set to the first
PDN button (assigned to the CO 01) only. This Delayed Ringing setting applies to all PDN
buttons on the same PT.
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
User Manual
7
6
delayed ringing type no.
Enter the delayed ringing type
Dial 76.
number (0 through 4).
-0: Immediate Ring
-1: 1-ring Delay
-2: 3-ring Delay
-3: 6-ring Delay
-4: No Ring
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
Station Programming
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
87
Advertisement
Table of Contents
